Cable Pinouts for PXIe-2524/5/6 and PXIe-2737/8/9 Switch Modules

Overview

This document provides pinout assignments for the PXIe-2524/5/6 and PXIe-2737/8/9 switch modules while using a 160 pin DIN cable.

Introduction

Switch Modules Covered
PXIe-2524
PXIe-2525
PXIe-2526
PXIe-2737
PXIe-2738
PXIe-2739

 

The pinouts for the 160 Pin DIN to 160 Pin DIN, 160 Pin DIN to 4 D-SUB, and 160 Pin Din to Bare Wire cables, with respect to the switch modules listed above, are outlined in the Excel document attached.  Note that the PXIe-2524 and the PXIe-2525 have multiple pinouts depending on their software-selected topology, and thus have their own sheets.  The PXIe-2526 also has two possible pinouts based on the topology selected, both of which are shown in two columns on the first sheet.

For more information on the connecting cables themselves, as well as the NI TBX-50B connector block, see the links below.

Was this information helpful?

Yes

No