Programming with NI-488.2 Software


This document explains the philosophy and structure of the National Instruments
IEEE 488.2 software for personal computers. It describes the software functions used in writing an NI-488.2 program and the actual process of developing an application program. It also describes several utility programs that you can use to shorten development time.



NI-488.2 is the name of the National Instruments IEEE 488 software. NI-488.2 software, which has been the de facto industry standard for many years, is a high-speed driver with several utilities that help in developing and debugging an application program. Because the NI-488.2 driver has high-level commands that automatically handle all bus management, you do not have to learn the programming details of the GPIB hardware board or the IEEE 488.2 protocol. Low-level commands are also available for maximum flexibility and performance.

The NI-488.2 driver was the first loadable IEEE 488 device driver for MS-DOS-based personal computers. It is available for different computer platforms, including PC compatibles, PS/2, Macintosh, Sun, DEC, HP, and Silicon Graphics, running under many operating systems such as DOS, Windows, Windows 2000/XP/Vista, Windows NT, Mac OS, OS/2, UNIX, Solaris, OSF/1, and IRIX. NI-488.2 programs are portable across these different platforms. Major companies such as IBM, Tektronix, Philips, LeCroy, Howtek, Sharp, Perkin-Elmer, Instron, Bruel & Kjaer, Hitachi Nakaworks, and Advantest all use our NI-488.2 software to produce innovative, high-quality products. This large backing has established NI-488.2 as the de facto industry standard.

Subroutine-Structured Driver

The NI-488.2 driver is subroutine-structured. This type of driver structure includes special subroutines already programmed by a vendor. A subroutine-structured driver gets its name because these subroutines are called as routines or functions from the programming language in which the application program was written. National Instruments chose a subroutine structure for the NI-488.2 driver rather than a character-I/O structure, which was chosen by some other vendors, because the subroutine structure is faster, easily handles buffered DMA transfers, and uses a structured, hierarchical programming style familiar to users of modern programming languages. National Instruments also offers a character-I/O driver, because it can be helpful for some applications.

The NI-488 driver functions have the following format:

ibfunction (ud, parameter list)

where ibfunction is the NI-488 function name (for example, ibrd for read, ibwrt for write, ibrsp for request serial poll), ud is the unit descriptor for the device or board accessed by the function (for example, DM5008 or simply dmm for a Tektronix digital multimeter), and parameter list is the list of arguments for the particular ibfunction (for example, a buffer pointer and a count for ibrd and ibwrt). The parameter list varies slightly for each programming language, but the function names remain constant. There are over 30 NI-488 functions to cover all IEEE 488 bus management functions.

The NI-488.2 driver contains an additional set of routines. These NI-488.2 routines have the following format:

routine (board, parameter list)

where routine is the NI-488.2 routine name (for example, FindLstn for Find All Listeners), board is the board number that the routine is accessing, and parameter list is the list of arguments for the particular routine. There are over 20 NI-488.2 routines, which cover all IEEE 488.2 bus management functions.

NI-488.2 -- Structured Programming

Structured, hierarchical programs use subroutines or functions. This is a preferred and familiar style to programmers using compiled programming languages such as Visual Basic, C, FORTRAN, and Pascal.

NI-488 Functions
NI-488.2 software is designed to meet a wide spectrum of needs, from low-end applications to the most sophisticated tasks. NI-488.2 software has two levels of functions – high-level functions for ease-of-use and low-level functions for maximum flexibility and performance.

High-Level Functions
High-level functions hide the IEEE 488 protocol by automatically calling a sequence of NI-488.2 low-level functions. High-level functions access a specific device and take care of the addressing and bus management protocol for that device. NI-488.2 software includes a complete set of high-level functions. You can also build your own customized high-level functions. The high-level functions can combine several GPIB operations, such as sending interface clear (IFC) or remote enable (REN), into one subroutine.

Low-Level Functions
Low-level calls give you the flexibility to make one command control multiple devices or to change the address status of instruments. If you understand the GPIB protocol, you can use low-level functions to control the interface board and the GPIB directly.

Table 1 shows a Visual Basic language comparison of the number of low-level functions that make up one high-level function used to serial poll a specified driver.

Table 1. Comparison of NI-488 High-Level and Low-Level Functions in Visual Basic
High-Level Function
Low-Level Function
CALL ibrsp (dvm%, status%) cmd$ = "?" + chr$(&H18) + "G!"
CALL ibcmd (gpib0%, cmd$)
status$ = space$(1)
CALL ibrd (gpib0%, status$)
cmd$ = "_?" + chr$(&H19)
CALL ibcmd (gpib0%, cmd$)

NI-488.2 Routines
The NI-488.2 routines consist of high-level routines and low-level routines. More accurately, these routines can be broken down into the following groups:

  • Simple Device I/O
  • Multiple Device I/O
  • Multiple Device Control
  • Bus Management
  • Low-Level I/O

You can use the NI-488.2 routines with compliant 488.2-compatible devices to achieve greater predictability of instrument behavior and programming correctness, and increased programming similarity between the instruments of different manufacturers.

Language Interface
When you use functions and routines designed by National Instruments to access the NI-488.2 driver, you must define them to the programming language you are using. Each application program includes a declaration file, which defines the proper use of parameters for the functions and routines (such as vbib-32.bas for Visual Basic, windecl.h for Windows C programs, and decl-32.h for Windows 95 C programs).

Because NI-488.2 bypasses operating system entry points, the program must also interface with the device driver. To interface the program with the device driver, you must use a language interface written by National Instruments. This language interface is specific to a particular programming language. It can link to a compiled language program or load into an interpretive language program. The language interface first locates and opens the NI-488.2 driver. Then, it maps the subroutine calling conventions of the programming language to the calling conventions expected by the NI-488.2 driver. This process of including a declaration file and linking files to the compiled program is familiar to compiled language users. Interpretive language users, however, must load the language interface at the beginning of a program.

Table 2 contains a complete list of the Visual Basic NI-488 functions, their parameters, and a short description of each. Table 3 contains a complete list of the Visual Basic NI-488.2 routines, their parameters, and a short description of each.

Table 2. Visual Basic NI-488 Functions
CALL Syntax
ibask (ud%, option%, value%) Checks current configuration parameters
ibcac (ud%, v%) Become Active Controller
ibclr (ud%) Clear specified device
ibcmd (ud%, cmdbuf$) Send commands from string
ibcmda (ud%, cmdbuf$) Send commands asynchronously from string
ibconfig (ud%, option%, value%) Set current configuration parameters
ibdev (BdIndx%, pad%, sad%, tmo%, eot%, eos%, ud%) Open and initialize a device descriptor
ibdma (ud%,v%) Enable/disable DMA
ibeos (ud%,v%) Change/disable EOS mode
ibeot (ud%,v%) Enable/disable END message
ibfind (udname$,ud%) Open device and return unit descriptor
ibgts (ud%,v%) Go from Active Controller to standby
ibist (ud%,v%) Set/clear ist
iblines (ud%, clines%) Returns status of the GPIB control lines
ibln (ud%,pad%,sad%,listen%) Check for the presence of a device on the bus
ibloc (ud%) Go to local
ibonl (ud%,v%) Place device online/offline
ibpad (ud%,v%) Change primary address
ibpct (ud%) Pass control
ibppc (ud%,v%) Parallel poll configure
ibrd (ud%, rdbuf$) Read data to string
ibrda (ud%, rdbuf$) Read data asynchronously to string
ibrdf (ud%,flname$) Read data to file
ibrpp (ud%,ppr%) Conduct a parallel poll
ibrsc (ud%,v%) Request/release system control
ibrsp (ud%,spr%) Return serial poll byte
ibrsv (ud%,v%) Request service
ibsad (ud%,v%) Change secondary address
ibsic (ud%) Send interface clear
ibsre (ud%,v%) Set/clear remote enable line
ibstop (ud%) Abort asynchronous operation
ibtmo (ud%,v%) Change/disable time limit
ibtrg (ud%) Trigger selected device
ibwait (ud%,mask%) Wait for selected event
ibwrt (ud%, wrtbuf$) Write data from string
ibwrta (ud%, wrtbuf$) Write data asynchronously from string
ibwrtf (ud%,flname$) Write data from file

Table 3. Visual Basic NI-488.2 Routines
ibstop (ud%) Abort asynchronous operation
ibtmo (ud%, v%) Change/disable time limit
ibtrg (ud%) Trigger selected device
ibwait (ud%, mask%) Wait for selected event
ibwrt (ud&, sstr, cnt&) Write data from string
ibwrta (ud&, sstr, cnt&) Write data asynchronously from string
ibwrtf (ud%, flname$) Write data from file
AllSpoll (board%, addresslist%(0), resultlist%(0)) Serial poll all devices
DevClear (board%, address%) Clear a single device
DevClearList (board%, addresslist%(0)) Clear multiple devices
EnableLocal (board%, addresslist%(0)) Enable operations from the front of a device
EnableRemote (board%, addresslist%(0)) Enable remote GPIB programming of devices
FindLstn (board%,addresslist%(0),resultlist%(0), limit%) Find all Listeners
FindRQS (board%, addresslist%(0), result%) Determine which device is requesting service
PassControl (board%, address%) Pass control to another device with Controller capability
PPoll (board%, result%) Perform a parallel poll
PPollConfig (board%, address%, dataline%, sense%) Configure a device for parallel polls
PPollUnconfig (board%, addresslist%(0)) Unconfigure devices for parallel polls
RcvRespMsg (board%, data$, termination%) Read data bytes from already addressed device
ReadStatusByte (board%, address%, result%) Serial poll a single device to get its status byte
Receive (board%, address%, data$, termination%) Read data bytes from a GPIB device
ReceiveSetup (board%, address%) Prepare a particular device to send data bytes and prepare the GPIB board to read them
ResetSys (board%, addresslist%(0)) Initialize a GPIB system on three levels
Send (board%, address%, data$, eotmode%) Send data bytes to a single GPIB device
SendCmds (board%, commands$) Send GPIB command bytes
SendDataBytes (board%, data$, eotmode%) Send data bytes to already addressed devices
SendIFC (board%) Clear the GPIB interface functions with IFC
SendList (board%, addresslist%(0), data$, eotmode%) Send data bytes to multiple GPIB devices
SendLLO (board%) Send the local lockout message to all devices
SendSetUp (board%, addresslist%(0)) Prepare particular devices to receive data bytes
SetRWLS (board%, addresslist%) Place particular devices in the Remote with Lockout state
TestSRQ (board%, result%) Determine the current state of the SRQ line
TestSys (board%, addresslist%, resultlist%(0)) Cause devices to conduct self-tests
Trigger (board%, address%) Trigger a single device
Triggerlist (board%, addresslist%(0)) Trigger multiple devices
WaitSRQ (board%, result%) Wait until a device asserts Service Request


With NI-488.2 software, a separate routine or function call uniquely identifies the subroutine. You can use the ibfind function to return a descriptor defined by the operating system for each GPIB interface board and device in a system. By using NI-488 functions or NI-488.2 routines to directly access a particular board or device, you can bypass the operating system and reduce overhead. Figure 1 compares the performance of a character-I/O driver, our NI-488 driver running on the NEC µPD7210 Controller chip, our NI-488.2 driver running on the NAT4882™ Controller chip, and our NI-488.2 driver running on the TNT4882C Controller chip.

Figure 1. NI-488 Throughput Comparison

GPIB hardware interfaces equipped with the NAT4882 and Turbo488™ ASICs can transfer data at rates exceeding 1 Mbytes/s for reads and writes. TNT4882C-based interfaces can attain IEEE 488.1 transfer rates of 1.5 Mbytes/s and HS488 transfer rates up to 8 Mbytes/s. These chips increase efficiency by moving time-consuming software driver functions into hardware. The NAT4882 and Turbo488 are featured on boards for ISA, MIcro Channel, Macintosh LC bus, and DEC TURBOchannel. The TNT4882C is featured on boards for PCI, ISA, EISA, PC Card (PCMCIA), Macintosh NuBus, Sun SBus, and NEC bus.

Buffered Transfers

Buffered data transfers are easy to accomplish with a subroutine-structured driver. A buffered data transfer is a transfer of many data values between a device and computer memory. This capability is important for instruments that deal with large arrays of data, such as digitizers and spectrum analyzers. Digitizers are the fastest growing instruments, particularly with the high-powered analysis capabilities of modern PCs and software.

The NI-488 software makes buffered data transfers easy and transparent. The software can accomplish these transfers with only one command. This is done by specifying one of the parameters of an NI-488 function or NI-488.2 routine as an array, string, or file. Then data is read into or written from that particular array, string, or file. Buffered data transfers are much easier to program in instruments with a subroutine-structured driver than with a character-I/O driver. Table 4 illustrates this point.

Table 4. Comparison of the NI-488.2 Driver Code and Character-I/O Driver Code
NI-488.2 Driver
Character-I/O Driver
CALL ibrd (scope%,wvfrm$)


CALL Receive (0,1,wvfrm$,STOPend)
DEF FNgetwd(addr)=PEEK(addr) +
   256 * PEEK(addr + 1)
ds% = VARSEG(wvfrm$)
rdesc = 0
rdesc = VARPTR(wvfrm$)
PRINT #1, "ENTER 01 #1024 BUFFER";
   ds%;":";FNgetwd(rdesc + 2);"DMA"

NI-488.2 Program Examples

The example programs shown below use high-level (device) functions and routines that automatically handle the details of GPIB protocol. These programs first configure the voltage type, voltage range, and speed of a multimeter, and then they perform a serial poll, take a voltage reading, and print the reading.

Using NI-488 Functions
Using NI-488.2 Routines
Visual Basic
Private Sub Command1_Click()
VOLT$ = SPACE$ (13)
TextDisplay = VOLT$
Visual Basic
Private Sub Command1_Click()
VOLT$ = SPACE$ (13)
CALL Send (0,1, "*RST; VDC; RATE F,
     MEAS1?", NLend)
CALL ReadStatusByte (0, 1, spr%)
CALL Receive (0, 1, VOLT$, STOPend)
TextDisplay = VOLT$
#include <stdio.h>
#include "decl-32.h"
main () {
     char int dmm; spr; volt [13];
     dmm = ibfind ("DMM");
     ibwrt (dmm, "F0R0S2", 6);
     ibrsp (dmm, &spr);
     ibrd (dmm, volt, 13);
     printf ("%s", volt);
#include <stdio.h>
#include "decl-32.h"
main () {
     int spr;
     char volt [13];
     Send (0, 1, "FOR0S2", 6, NLEND);
     ReadStatusByte (0, 1, &spr);
     Receive (0, 1, volt, 13, STOPend);
     printf ('%s", volt);

After compiling these programs, you must link the object code with the appropriate NI-488 language interface to create your stand-alone executable program.


The NI-488 software includes several useful utilities designed to shorten development time. These utilities can help you quickly develop and debug your application programs.

Interactive Control Program
With the Interface Bus Interactive Control (IBIC) program, you can communicate with GPIB devices through NI-488 functions and NI-488.2 routines. This program is a powerful development and debugging tool. You can use it to learn the NI-488 functions and routines, learn the device-specific messages of an instrument, debug an application program one step at a time, or locate a malfunctioning device on the GPIB.

NI-488.2 Communicator
You can use the NI-488.2 Communicator to verify that you can establish simple communication with your GPIB instrument. This is an interactive utility that allows you to write commands to your instrument and read responses back from your instrument. It provides detailed information about the status of the NI-488.2 calls and you can use it to print sample C source code that performs a simple query to a GPIB instrument.

Configuration Utility
The configuration utility is a menu-driven program in which you can customize software parameters such as the device name, address, message termination mode, and timeout limit for use with functions and routines. With a configuration utility, you do not have to specify these parameters in each program and you can use names and mnemonics in your program to reference actual GPIB devices.

NI I/O Trace
Using NI I/O Trace, the user can “trace” driver calls. This feature is extremely useful for application debugging.  The NI I/O Trace records all device and board level calls with a time stamp. Developers can easily and efficiently detect errors and timing issues in their applications.  This utility further differentiates National Instruments GPIB device functionality and usability above all others.

GPIB Anaylzer
With GPIB Analyzer, the you can analyze the physical bus activity by observing all of the GPIB handshake signals, interface management signals, and data signals. This capability is very useful for advanced debugging where NI I/O Trace alone cannot resolve the problems. In addition, you can analyze bus timing issues in much more detail. The GPIB Analyzer software is only available with NI GPIB Analyzer boards (PCIe/PCI-GPIB+). No other GPIB supplier provides similar functionality.

Diagnostic Programs
All of our products include hardware and software diagnostic programs to help you check for hardware conflicts and verify proper software installation.


The NI-488.2 software is designed for high performance and maximum flexibility. There are many options available to you with the NI-488.2 software. You are not required to learn the programming details of the GPIB interface board or IEEE 488.2 protocol. If you are already familiar with the IEEE 488.2 protocol, NI-488.2 software supplies you with low-level functionality, thereby giving you maximum flexibility and performance. This application note has reviewed the features of the NI-488.2 software so that you can achieve performance and minimize development time.

Was this information helpful?