From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Support Documentation Bugs

RFIC Test Software 20.5 Bug Fixes

Created Jun 22, 2023

Overview

The following items are notable issues fixed between the release of RFIC Test Software 20.0 and RFIC Test Software 20.5, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of RFIC Test Software.

Bug Number

Legacy ID

Description

Details
1120071

RFIC SFP error message cleans up automatically

In the RFIC SFP, when an error occurs, the error will sometimes get cleaned up automatically, which makes it difficult to know what went wrong. For example, when using MATLAB® digital predistortion on a machine that only has the basic MATLAB software installed (e.g. no additional toolbox is installed), the actual error message will only flash across the message box.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

RFIC Test Software 20.0

Resolved Version:

RFIC Test Software 20.5

Added:

N/A
1210618

RFIC SFP throws an error when using the Nanosemi Single-Band DPD model upon launching the SFP

In the RFIC SFP, the following error returns when launching the SFP, selecting Nanosemi Single-Band as the DPD model, and running the measurement:
Error: Error -379902 occurred at RFmxSpecAn AMPM Configure Reference Waveform.vi

Possible reason(s):

Internal software error. Contact support, at ni.com/support.
Changing the DPD model to another option returns the following error:
Error: Error -379902 occurred at Property Node (arg 2) in RFmxInstr Configure Frequency Reference.vi:2390001->ET DPD Reference Application.lvlib:ET DPD UTIL Config RFmx Instr Parameters.vi->ET DPD Reference Application.lvlib:ET DPD ACT Commit RFmx Parameters Wrapper.vi->ET DPD Reference Application.lvlib:ET DPD Reference Application.vi

Possible reason(s):

Internal software error. Contact support, at ni.com/support.

Workaround:

Restart the RFIC SFP and run the measurement using the default DPD model. After using the default DPD model, select Nanosemi Single-Band, and run the measurement again.

Reported Version:

RFIC Test Software 20.0

Resolved Version:

RFIC Test Software 20.5

Added:

N/A
1149843

RFIC SFP does not support 320 MHz in 802.11ax SU PPDU

RFIC SFP does not support 320 MHz bandwidth.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

RFIC Test Software 20.0

Resolved Version:

RFIC Test Software 20.5

Added:

N/A

Additional Patch Information

Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.

These patches currently do not have any special instructions.

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).