Home Support Documentation Bugs

ECU Test System Maintenance Software 21.0 Bug Fixes

Created Jun 22, 2023

Overview

The following items are notable issues fixed between the release of ECU Test System Maintenance Software 1.0 and ECU Test System Maintenance Software 21.0, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of ECU Test System Maintenance Software.

Bug Number

Legacy ID

Description

Details
1329655

Terminal blocks are incorrectly labeled as cables in failure messages

Failure messages in the report may label terminal block components as cables.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

ECU Test System Maintenance Software 21.0.0

Resolved Version:

ECU Test System Maintenance Software 21.0.1

Added:

Mar 9, 2021
1211012

ECUTS-16000/16001 User Manual shows incorrect pins in the J18, J19, J20, and J21 pin map when populated with a PXIe-6378

4 ground pins are incorrect: B39, A45, B45, and B47.

Workaround:

The pins should be mapped as follows:
  • B39 = DGND
  • A45 = DGNDP0.0_P0.1
  • B45 = DGNDP1.0_P1.1
  • B47 = DGND

Reported Version:

ECU Test System Maintenance Software 21.0.0

Resolved Version:

ECU Test System Maintenance Software 21.0.1

Added:

Mar 9, 2021
1364766

Disconnected load wires are not always detected for RMX-4005 devices

If an RMX-4005 is just connected to only one set of Load wires, the ECU Test System Maintenance Software's continuity check with a Field Diagnostic Tester (FDT) may incorrectly pass.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

ECU Test System Maintenance Software 21.0.0

Resolved Version:

ECU Test System Maintenance Software 21.0.1

Added:

Mar 9, 2021

Additional Patch Information

Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.

These patches currently do not have any special instructions.

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).