Archived: NI-RIO 3.1 Known Issues

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Overview

This document has been archived and is no longer updated by National Instruments.

This document contains the NI-RIO 3.1 known issues that were discovered before and since the release of NI-RIO 3.1. Not every issue known to NI will appear on this list; it is intended to only show the severe and more common issues that can be encountered. Each Issue appears as a row in the table and includes an issue title, a brief description of the problem, any workarounds that might help resolve the issue, and the date the issue was added to the document (not the reported date).

The workarounds that appear in the document are not always tested by NI and are not guaranteed to resolve the issue. If a workaround refers you to the NI KnowledgeBase, please visit www.ni.com/kb/ and enter that KB number in the search field to locate the specific document. The brief description given does not necessarily describe the problem in full detail, and it is expected that you might want more information on an issue. If you would like more information on an issue feel free to contact NI and referencing the ID number given in the document. You can contact us through any of the normal support channels including phone, email, or the discussion forums. See www.ni.com/ask to contact us. Also consider contacting us if you find a workaround for an issue that is not listed in the document so that we can add the workaround to the document.

Known Issues

The following items are known issues in NI-RIO 3.1.

 

Known Issues with NI-RIO 3.1 and LabVIEW 8.6.x

133244 /

155356

--

NI 9264, last AO channel updates one loop iteration late

 154805-- Cannot FTP to a NI 9802 SD card, mounted in RT
  116620 —NiRioScanInterface DMA Channel is listed when using Scan Interface along with LabVIEW FPGA Host Interface

4K1CDCMA

DMA from the host to the FPGA target on the cRIO-9002/9004

132979

Reading Empty Target to Host DMA FIFO Gradually Starves CPU in built LabVIEW RT executables on cRIO targets

131654

Cannot Deploy Scan Interface Modules or IO Variables with Non-ASCII Characters

117018

Cannot Deploy any modules with the character “/” in the name

135570

Abort and Reset Methods do not execute on incoming error

   

Known Issues with NI-RIO 3.1 and LabVIEW 8.5.x

4K1CDCMA

DMA from the host to the FPGA target on the cRIO-9002/9004

VIs that use the calibration API should be modified to use the RIO Device I/O control

40243

FPGA code generation into an existing host VI is very slow in FPGA Wizard

Large configuration files load slowly in the FPGA Wizard

Maximum Time I/O rate values is 70 kHz for FPGA Wizard

Selecting external clock requires external clock source in FPGA Wizard

114569

NI-RIO 3.1 does not install support for the NI 987x serial modules for

LabVIEW 8.5.x

   

Known Issues with NI-RIO 3.1 and LabVIEW 8.2.x

4G3AED20

FPGA I/O Property Node returns wrong value for Module Model Code of NI 9217 module

4DAEDMLX

Read/Write Controls execute more slowly after upgrade to NI-RIO 2.4.1 or later

4K1CDCMA

DMA from the host to the FPGA target on the cRIO-9002/9004

3VKDOURY

DMA in parallel While Loops

 

ID

Known Issue

Known Issues with NI-RIO 3.1 and LabVIEW 8.6.x

133244 / 155356

NI 9264, last AO channel updates one loop iteration late

When the channel count is below 8, the last channel in the list will update its output the next time the node is called, usually the next iteration.

Workaround - Upgrade to NI-RIO 3.1.1 or Either: add an extra channel that you do not need or make your last channel any number greater than 8

Date Added - 4/14/09

 154805Cannot FTP to a NI 9802 SD card, mounted in RT

An SD card installed in a NI 9802 and mounted in RT cannot be accessed through FTP with NI-RIO 3.1 and LabVIEW 8.6.1 only.

Workaround - Upgrade to NI-RIO 3.1.1

Date Added - 4/14/09
 116620

NiRioScanInterface DMA Channel is listed when using Scan Interface along with LabVIEW FPGA Host Interface

When using Scan Inteface along with LabVIEW FPGA Host Interface, DMA FIFO method nodes display internal Scan Interface DMA Channels

Workaround—N/A


Date Added—01/15/2009
Return to top

4K1CDCMA

DMA from the host to the FPGA target on the cRIO-9002/9004
DMA is not supported from the host to the FPGA target on the cRIO-9002/9004.

LabVIEW returns an error if you try to output DMA from the cRIO-9002/9004.


Workaround—N/A

Date Added—01/15/2009
Return to top

132979

Reading Empty Target to Host DMA FIFO with Timeout Set to Zero Gradually Starves CPU in built LabVIEW RT executables on cRIO targets

In built LabVIEW RT applications on cRIO, if a Target to Host DMA FIFO read executes with a timeout of zero and the FIFO is empty a processor leak occurs that increases the CPU usage on the controller.

Workaround— Read zero elements to find elements remaining, instead of using a zero timeout


Date Added—01/15/2009
Return to top

131654

Cannot Deploy Scan Interface Modules or IO Variables  with Non-ASCII Characters

When deploying Scan Interface Modules or IO Variables with Non-ASCII characters such as Chinese or Japanese Characters it will report that the Deployment Completed with Errors.

Workaround— Rename any Scan Interface Modules or IO Variables using Alpha Numeric  Characters.


Date Added—01/15/2009
Return to top

117018

Cannot Deploy any modules with the character “/” in the name

If the modules new name contains “/” deployment will fail

 

Workaround—Do not rename any modules to include the “/” character

 

Date Added—2/13/09

Return to top

135570

Abort and Reset Methods do not execute on incoming error

If an error is passed to either the Abort or Reset Methods, they will not execute and the error will be passed through

 

Workaround---Check, report, and clear errors manually in any error clusters wired to an Abort or Reset; otherwise, do not pass error clusters to these methods

 

Date Added—2/13/09

Return to top

Known Issues with NI-RIO 3.1 and LabVIEW 8.5.x

4K1CDCMA

DMA from the host to the FPGA target on the cRIO-9002/9004
DMA is not supported from the host to the FPGA target on the cRIO-9002/9004.

LabVIEW returns an error if you try to output DMA from the cRIO-9002/9004.


Workaround—N/A

Date Added—01/15/2009
Return to top

 --

VIs that use the calibration API should be modified to use the RIO Device I/O control
Applications from versions of LabVIEW older than 8.5.x that use 783XR Calibration - Open FPGA VI Reference.vi should be updated to use the RIO Device I/O control instead of the VISA I/O control.


Workaround—N/A

Date Added—01/15/2009
Return to top

 40243

FPGA code generation into an existing host VI is very slow in FPGA Wizard

If you use the FPGA Wizard to generate code, open the host VI, then generate code into the same VI, the code generation goes very slowly.


Workaround—N/A

Date Added—01/15/2009
Return to top

- -

Large configuration files load slowly in FPGA Wizard
Opening a large FPGA Wizard configuration file can take several minutes.


Workaround—N/A

Date Added—01/15/2009
Return to top

 --

Maximum Timed I/O rate value is 70 kHz in FPGA Wizard generated code
The maximum rate you can set for the Single Point Timed I/O timing engine on the Single Point Timed configuration page is 70 kHz. The maximum rate achievable varies with different hardware devices.


Workaround—N/A

Date Added—01/15/2009
Return to top

 --

Selecting external clock requires external clock source with FPGA Wizard
If you select External for the Clock Type on the Single Point Timed or Buffered DMA Input configuration page and you do not have an external clock source connected, LabVIEW appears to hang when you run the generated host VI. Press the Global Stop button to stop the VI or add an external clock source to resume running the VI.

Workaround—N/A

Date Added—01/15/2009
Return to top

114569

NI-RIO 3.1 does not install support for the NI 987x serial modules for LabVIEW 8.5.x

For serial module support in LabVIEW 8.5 download and install the C-Series Serial Software installer.  NI-RIO 3.1 will install support for the NI 987x serial modules for LabVIEW 8.6.x.

 

Workaround—Install C-Series Serial Software from the installer linked above.


Date Added—01/15/2009
Return to top

Known Issues with NI-RIO 3.1 and LabVIEW 8.2.x

 4G3AED20

FPGA I/O Property Node returns wrong value for Module Model Code of NI 9217 module
The FPGA I/O Property Node returns the value 9217, which is the Product ID, not the Module Model Code, of the NI 9217. The Module Model Code is 0x712B.


Workaround—Look for 9217 in applications looking for the Product ID in LabVIEW 8.2.x
Date Added—01/15/2008
Return to top

 4DAEDMLX

Read/Write Controls execute more slowly after upgrade to NI-RIO 2.4.1 or later
Read/Write Control now uses a Call Library Function Node to call the RIO driver. The Call Library Function Node executes additional code if debugging is enabled. To restore the performance to the original level, you must disable debugging in any VIs that contain Read/Write Controls.

 

Workaround— You can disable debugging in a VI by going to File»VI Properties»Execution and unchecking Allow debugging. 

Date Added—01/15/2009
Return to top

 4K1CDCMA

DMA from the host to the FPGA target on the cRIO-9002/9004
DMA is not supported from the host to the FPGA target on the cRIO-9002/9004.

LabVIEW returns an error if you try to output DMA from the cRIO-9002/9004.


Workaround—N/A

Date Added—01/15/2009
Return to top

 3VKDOURY

DMA in parallel While Loops

If you use DMA in parallel While Loops either on the cRIO-9002/9004 or while accessing the FPGA target across a network, one of the While Loops might hang while the other executes.

 

Workaround—N/A


Date Added—01/15/2009
Return to top

 

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).