Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

This document explains how to connect to the NI-9238 . Note Before you begin, read the NI-9238 Safety, Environmental, and Regulatory Information document on ni.com/manuals and complete the software and ...

AI0+ AI0– AI1+ AI1– AI2+ AI2– AI3+ AI3– 0 1 0 1 0 1 0 1 Table 1. Signal Descriptions Signal Description AI+ Positive analog input signal connection AI- Negative analog input signal connection Parent topic: ...

Ensure that the environment in which you are using the NI-9238 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-30) ...

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection. Attention Suivez ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9232 Getting Started 3 AI, ±30 V, 24 Bit, 102.4 kS/s/ch Simultaneous Where to Go Next Tags: Getting Started NI-9232 class="topictitle1" ...

Complete the following steps to install the NI 9246 backshell. Figure 4. Connector Backshell Installation 1 2 Align the backshell components with the device terminals. Secure the backshell using the captive ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9234 Getting Started 4 AI, ±5 V, 24 Bit, 51.2 kS/s/ch Simultaneous, AC/DC Coupling, IEPE AC Coupling Where to Go Next Tags: Getting Started ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9244 Getting Started 3 AI/1 Neutral, 400 Vrms L-N/690 Vrms L-L, 24 Bit, 50 kS/s/ch Simultaneous Where to Go Next Tags: Getting Started ...

The NI-9244 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 12 ATEX 1202658X and is IECEx UL 14.0089X certified. Each NI-9244 is marked II 3G and is suitable for use in Zone 2 hazardous locations, ...

If hazardous voltages are connected to the product, take the following precautions. A hazardous voltage is a voltage greater than: 30 V RMS , 42.4 V peak , or 60 V DC in DRY LOCATIONS 16 V RMS , 22.6

NI 9244 AI0 Phase A Phase B Phase C Neutral AI2 AI1 Neutral Parent topic: Three-Phase Measurement Configurations

This document explains how to connect to the NI-9244 . Note Before you begin, read the NI-9244 Safety, Environmental, and Regulatory Information document on ni.com/manuals and complete the software and ...

Caution For safe operation with hazardous voltages, you must use the NI 9969 Connector Backshell with the 4-terminal connector on the NI-9244 . Complete the appropriate procedure for each wire gauge. Parent ...

This document explains how to connect to the NI-9231 . Note Before you begin, read the NI-9231 Safety, Environmental, and Regulatory Information document on ni.com/manuals and complete the software and ...

3a 10 9 6 7 8 — AI+ AI- — — 3b 4 5 2 1 EX- — — — EX+ NI-9983D/9983L 4 5 1 2 3a 3b 6 7 8 9 EX+ — EX- — — — AI+ AI-

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

BNC or screw terminal connectivity Anti-alias filters 250 V RMS , CAT II , channel-to-channel isolation (screw terminal); 60 V DC , CAT I , channel-to-channel isolation (BNC) The NI-9239 is an analog input ...

NI-9238 Specifications The following specifications are typical for the range -40 °C to 70 °C unless otherwise noted. All voltages are relative to the AI- signal on each channel unless otherwise noted. ...

What to Use NI 9969 backshell 12 AWG to 14 AWG wire Smallest strain-relief piece Screwdriver What to Do 1 2 Route wires under the smallest strain-relief piece. Secure the smallest strain-relief piece and ...

What to Use NI-9235 spring-terminal connector copper conductor wire with of insulation stripped from the end Flathead screwdriver with a 2.3 mm x 1.0 mm ( 0.09 in. x 0.04 in. ) blade, included with the ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI-9235 is suitable for use in hazardous locations; , and hazardous locations; and nonhazardous locations only. Follow these guidelines if you are installing the NI-9235 in a potentially explosive ...

The NI-9235 has been evaluated as equipment under DEMKO ATEX and is IECEx certified. Each NI-9235 is marked and is suitable for use in Zone 2 hazardous locations, in ambient temperatures of -40 °C ≤ Ta ...

If your application is subject to high vibration, NI recommends that you use the NI-9965 backshell kit to protect connections to the NI-9235 . Parent topic: Connecting the NI-9235

Ensure that the environment in which you are using the NI-9235 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-30) ...

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection. Attention Suivez ...

Showing 241-270 of 28316 results
9 of 944 pages