Filtered Results

I have a 2-wire, 3-wire, or 4-wire Resistance Temperature Detector (RTD) that I want to connect to my data acquisition (DAQ) device. What do the different color wires on my RTD mean, and how do I physically ...

I am deploying an application that uses a USB DAQ device and everything works fine. However, every time I connect the USB DAQ device, the NI Device Monitor popup window shows up with a Device Detected ...

When using a DAQ device to acquire voltage data, the displayed voltage amplitude is lower than expected.

When I am using NI-DAQmx with support for LabVIEW, is the Raw Data from the DAQmx Read.vi calibrated? How can I convert the acquired binary values to scaled values?

Why do I receive Error -200558 whenI try to use a task that contains multiple DAQ devices? One task cannot contain multiple independent devices. Create one task for each independent device.

The PXI(e) card in my chassis will not perform a Self-Calibration in NI MAX. I'm getting the following error message: Status Code: -201295 Device could not complete the calibration operation. Calibration ...

While reading the specifications of my DAQ device, I found a terminology called Absolute Accuracy at Full Scale. What is the meaning of Absolute Accuracy at Full Scale and how can I calculate it?

How do I measure current with an analog voltage input? Do I need a shunt resistor in my current measurement circuit?

I want to control a stepper motor drive (step/direction) using the digital output on my USB DAQ and I have connected all the necessary wiring, so how do I control the motor for some simple moves in LabVIEW? ...

My NI USB devices are showing up with RAW in their name in Measurement & Automation Explorer (MAX) on my Windows machine. Additionally, I cannot communicate with them using Test-Panels or reset the device. ...

Showing 81-90 of 329 results
9 of 33 pages