Filtered Results

Adjusts the external calibration constants for the baseboard of an SC Series device. You must connect a known voltage to the device and specify that voltage with reference voltage. Use the DAQmx 42xx Calibration ...

Indicates pairs of output voltage ranges supported by this device. Each pair consists of the low value, followed by the high value. Not supported Not supported in VIs that run in a web application 299B ...

Indicates the PXI slot number of the device. Not supported Not supported in VIs that run in a web application 232A attr232A.html

Indicates the sample modes supported by devices that support sample clocked digital input. Not supported Not supported in VIs that run in a web application Finite Samples 10178 Acquire or generate a finite ...

Indicates in bits the width of digital output port. Not supported Not supported in VIs that run in a web application 29A7 attr29A7.html

Indicates if the sample clock timing type is supported for the digital output physical channel. Not supported Not supported in VIs that run in a web application 29A8 attr29A8.html

Adjusts the external calibration constant for the timebase of a TIO device. You must connect a sinusoidal signal with a known frequency to the device and specify that frequency. You cannot calibrate PXI-6608 ...

Adjusts the external calibration constants for an X Series device. You must connect a known voltage to the device and specify that voltage with reference voltage. LabVIEW NXG does not support FPGA devices ...

Showing 81-90 of 2088 results
9 of 209 pages