Filtered Results

Creates channel(s) that use a thermistor to measure temperature. Use this instance when the thermistor requires voltage excitation. You must configure the physical channel(s) with TEDS information to use ...

Reads one or more pairs of pulse high and low times from a counter input task. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Read (Counter 1D Pulse ...

Creates channel(s) that use a sensor with charge output. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Acceleration-Accelerometer).vi ...

Creates channel(s) that use a frequency-to-voltage converter to measure frequency. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Frequency-Voltage).vi ...

Creates channel(s) that use an LVDT to measure linear position. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Position-LVDT).vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) that use(s) an RVDT to measure angular position. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Position-RVDT).vi ...

Creates channel(s) that use a Wheatstone bridge to measure pressure. Use this instance with sensors whose specifications provide a polynomial to convert electrical values to physical values. When you use ...

Creates channel(s) that use an eddy current proximity probe to measure position. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Position-EddyCurrentProxProbe).vi ...

Returns the reference voltage values to be used by a reference device to create a reference signal. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Get ...

FieldDAQ devices use software calibration to adjust the software scaling of signals read from and produced by your device. Using a precise reference signal, your device measures and calculates scaling ...

Indicates the AI digital filter types supported by the device. Not supported Not supported in VIs that run in a web application Custom 10137 Custom filter. Lowpass 16071 Lowpass filter. Highpass 16072 ...

Indicates the input gain settings supported by this device. Not supported Not supported in VIs that run in a web application 2993 attr2993.html

Indicates the triggers supported by this device for digital output tasks. Not supported Not supported in VIs that run in a web application Advance 12488 Advance trigger. Pause 12489 Pause trigger. Reference ...

Indicates the last date and time that the device underwent an external calibration. Using Traditional NI-DAQ (Legacy) to perform calibration does not update this property. This property is updated only ...

Indicates in degrees Celsius the temperature of the device at the time of the last external calibration. Compare this temperature to the current onboard temperature to determine if you should perform another ...

Indicates in months the National Instruments recommended interval between each external calibration of the device. Not supported Not supported in VIs that run in a web application 1868 attr1868.html

Indicates an array containing the names of the banks in the FieldDAQ. Not supported Not supported in VIs that run in a web application 29B7 attr29B7.html

Indicates the parent device which this bank is located in. Not supported Not supported in VIs that run in a web application 29B7 attr29B7.html

Indicates the number of DMA channels on the device. Not supported Not supported in VIs that run in a web application 233C attr233C.html

Indicates the number of timestamp engines available on the device. Not supported Not supported in VIs that run in a web application 2985 attr2985.html

Showing 141-160 of 2163 results
8 of 109 pages