Filtered Results

My NI USB devices are showing up with RAW in their name in Measurement & Automation Explorer (MAX) on my Windows machine. Additionally, I cannot communicate with them using Test-Panels or reset the device. ...

I have multiple NI data acquisition (DAQ) devices. When I acquire data (DAQmx Read (VI) multiple channels) and then merge them in to one TDMS file by usingTDMS Write Function, the resulting file volume ...

This tutorial provides step–by-step instructions for setting up your USB R Series device, adding it to a project, and creating an analog input acquisition using a DMA FIFO. Requirements Software LabVIEW ...

I have a 2-wire, 3-wire, or 4-wire Resistance Temperature Detector (RTD) that I want to connect to my data acquisition (DAQ) device. What do the different color wires on my RTD mean, and how do I physically ...

I am using a NI X-series DAQ hardware, why do I get high output in the DIO lines during the computer powering up state or after computer is shut down. Can this be changed?

I have one or more channels on my DAQ device not connected to any signal or sensor or the device is disconnected from the computer. Why are all of thechannels reading the same value? Why are my channels/signals ...

What is the difference between the sample clock (scan clock) and the convert clock (channel clock) on my multifunction data acquisition board?

I have old DAQ hardware or hardware that uses DAQmx that I am not sure is supported in my version of LabVIEW. How do I determine if my version of LabVIEW or DAQmx is compatible with my hardware and operating ...

What is the maximum distance of the USB cable that can be used for connecting my computer and a NI USB DAQ device?

I would like to accurately measure voltages between 14 V and 18 V. Is it possible to use a normal data acquisition +/-10V module to do this?

Showing 71-80 of 1606 results
8 of 161 pages