Filtered Results

Creates channel(s) that use a Wheatstone bridge to measure torque. Use this instance with sensors whose specifications do not provide a polynomial for scaling or a table of electrical and physical values. ...

Creates channel(s) that use an IEPE velocity sensor to measure velocity. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Velocity-IEPE ...

Specifies the source of the DAC offset voltage. The value of this voltage source determines the full-scale value of the DAC. Not supported Not supported in VIs that run in a web application Internal 10200 ...

Specifies the maximum instantaneous sound pressure level you expect to measure. This value is in decibels, referenced to 20 micropascals. NI-DAQmx uses the maximum sound pressure level to calculate values ...

Specifies whether to increment or decrement the counter on each edge. Not supported Not supported in VIs that run in a web application Count Up 10128 Increment counter. Count Down 10124 Decrement counter. ...

Specifies the logic level behavior on the input line. Not supported Not supported in VIs that run in a web application Logic Level Pull-up 16064 High logic. None 10230 Supply no excitation to the channel. ...

Adjusts the external calibration constant for the timebase of a DSA device with an adjustable oscillator. You must connect a sinusoidal signal with a known frequency to the device and specify that frequency ...

Adjusts the external calibration constants for an M Series device. You must connect a known voltage to the device and specify that voltage with reference voltage. LabVIEW NXG does not support FPGA devices ...

Adjusts the external calibration constants for an S Series device. You must connect a known voltage to the device and specify that voltage with reference voltage. LabVIEW NXG does not support FPGA devices ...

Showing 71-80 of 2088 results
8 of 209 pages