DSUB or LEMO connectivity Built-in support for accelerometer, powered-sensor, full-bridge, and voltage measurements Support for half-bridge, quarter-bridge, 60 V , and current measurements with adapters ...
LO HI EX- RTD/ Resistor EX+ R wire R wire R wire R wire NI 9219 I ADC I Parent topic: Measurement Types Related reference 4-Wire Resistance and 4-Wire RTD Pinout
Make sure that devices you connect to the NI-9219 are compatible with the module specifications. Use shielded cables and twisted pair wiring for the best signal quality. NI recommends using the backshell ...
What to Use NI-9219 spring-terminal connector copper conductor wire with of insulation stripped from the end Flathead screwdriver with a 2.3 mm x 1.0 mm ( 0.09 in. x 0.04 in. ) blade, included with the ...
LO HI NI 9219 + – The digital in measurement type is only supported in CompactRIO systems. Tip Visit ni.com/info and enter the Info Code 9219cdaq for information about implementing the digital in measurement ...
This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...
Figure 1. NI 9157/9159 Front Panel 4 6 2 5 1 C C V2 V1 INPUT 9-30 V 35W MAX NO FPGA APP USER FPGA1 USER FPGA2 USER FPGA3 P USER FPGA1 USER FPGA2 USER FPGA3 P OWER USER FPGA1
CompactRIO NI CompactDAQ Located at ni.com/manuals RELATED INFORMATION C Series Documentation & Resources ni.com/info cseriesdoc Services ni.com/services Installs with the software NI 9222 Datasheet NI-RIO ...
CompactRIO NI CompactDAQ Located at ni.com/manuals RELATED INFORMATION C Series Documentation & Resources ni.com/info cseriesdoc Services ni.com/services Installs with the software NI 9223 Datasheet NI-RIO ...
The NI-9229 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous locations ...