Filtered Results

Computes a set of coefficients for a polynomial that approximates the inverse of the polynomial with the coefficients you specify with the coefficients input. This VI generates a table of x versus y values ...

Configures TDMS file logging for the task. To maximize performance and to minimize file size, DAQmx TDMS files store raw data and scaling information separately, and do not need defragmentation. Attempting ...

Associates TEDS information with the physical channel you specify. If you do not specify the filename of a data sheet in the virtual TEDS file input, this node attempts to find a TEDS sensor connected ...

Creates channel(s) that use an LVDT to measure linear position. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Position-LVDT).vi :/lvdaqmx.chm::/DAQmx ...

Creates a route between a source and destination terminal. The route can carry a variety of digital signals, such as triggers, clocks, and hardware events. The source and destination terminals can be on ...

Creates channel(s) that use a Wheatstone bridge to measure pressure. Use this instance with sensors whose specifications provide a polynomial to convert electrical values to physical values. When you use ...

Creates channel(s) that use an eddy current proximity probe to measure position. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Position-EddyCurrentProxProbe).vi ...

Creates channel(s) to measure resistance. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Resistance).vi :/lvdaqmx.chm::/DAQmx ...

Creates a timing source that sends ticks to a Timed Loop on rising and/or falling edges of one or more digital lines. You can use this node only with devices that support digital change detection. For ...

Creates channel(s) that use a thermocouple to measure temperature. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Temperature-Thermocouple).vi ...

Creates channel(s) to measure voltage. If the measurement requires the use of internal excitation or you need excitation to scale the voltage, use the Custom Voltage with Excitation measurement type for ...

Creates channel(s) that use an LVDT to measure linear position. You must configure the physical channel(s) with TEDS information to use this VI. LabVIEW NXG does not support FPGA devices Not supported ...

Creates channel(s) to generate current. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AO-Current-Basic).vi :/lvdaqmx.chm::/DAQmx ...

Creates a channel for continually generating a waveform on the selected physical channel. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel ...

Creates channel(s) to generate voltage. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AO-Voltage-Basic).vi :/lvdaqmx.chm::/DAQmx ...

Creates a channel to count the number of rising or falling edges of a digital signal. With the exception of devices that support multi-counter tasks, you can create only one counter input channel at a ...

Creates channel(s) to duty cycle of a digital pulse. Connect the input signal to the default input terminal of the counter, unless you select a different input terminal. With the exception of devices that ...

Creates a channel to measure the frequency of a digital signal. With the exception of devices that support multi-counter tasks, you can create only one counter input channel at a time with this node, because ...

Creates a channel that uses a special purpose counter to take a timestamp and synchronizes that counter to a GPS receiver. With the exception of devices that support multi-counter tasks, you can create ...

Showing 121-140 of 922 results
7 of 47 pages