Filtered Results

Resets the waveform generator to a known state and resets session attributes to values specified in the IVI configuration store. If the session was created without a logical name, the node is equivalent ...

Overwrites the current calibration constants with those from the last successful external calibration. Invalidates data from any self-calibrations performed since the last time an external calibration ...

Returns the revision numbers of the NI-FGEN software and the instrument firmware. Not supported Not supported in VIs that run in a web application niFgen Revision Query.vi :/nifgenlv.chm::/niFgen_Revision_Query.html ...

Routes various signals to the backplane trigger lines or front panel terminals. The waveform generator must not be in the Generating state when you call this node. Not supported Not supported in VIs that ...

Configures the waveform generator to begin flatness calibration. Not supported Not supported in VIs that run in a web application niFgen Initialize Flatness Calibration.vi :/nifgenlv.chm::/niFgen_Initialize_Flatness_Calibration.html ...

Performs a full, internal self-calibration on the waveform generator. If the calibration is successful, new calibration data and constants are stored in the onboard EEPROM. Not supported Not supported ...

Creates and returns a new NI-FGEN session to the specified channel of a waveform generator that is used in all subsequent NI-FGEN calls. Optionally sets the initial state of session properties Range Check, ...

Sends a command to trigger the waveform generator. This node can act as an override for an external edge trigger. Not supported Not supported in VIs that run in a web application niFgen Send Software Edge ...

Determines whether or not the current generation has completed. This node returns True if the session is in the Idle or Committed states and only after the current generation is complete in Single Trigger ...

Showing 61-70 of 140 results
7 of 14 pages