Filtered Results

A grounded source is one in which the voltage signals are referenced to a system ground, such as earth or building ground, as shown in the following figure. Because such sources use the system ground, ...

The following figure shows how to position strain gage resistors in an axial configuration for the half-bridge type I. The following figure shows how to position strain gage resistors in a bending configuration ...

The half-bridge type II configuration only measures bending strain. The following figure shows how to position strain gage resistors in a bending configuration for the half-bridge type II. Half-bridge ...

Integrated Electronics Piezoelectric (IEPE) is a type of transducer that is packaged with a built-in amplifier. Because the charge produced by some sensors is very small, the electrical signal produced ...

Signals often can exceed the limits that a measurement device can handle. Trying to measure a signal that is too large for the measurement device can damage the device or you. To keep you and your device ...

For control applications, the amount of time that the loop cycle time varies from the desired time is called jitter. The maximum amount that a loop cycle time varies from the desired loop cycle time is ...

Input limits are the maximum and minimum values you expect to measure, after any scaling, including custom scaling. Input limits are sometimes confused with device range. Device range refers only to the ...

Linearization is a type of signal conditioning in which software linearizes the voltage levels from transducers, so the voltages can be scaled to measure physical phenomena. For example, a change in voltage ...

Requirement The I/O tasks do not support hardware-timed operations. Solution Apply software timing to your time-critical loop by using the Timed Loop in LabVIEW or asynchronous timers in LabWindows/CVI. ...

Requirement I/O needs to be hardware-timed. All output values need to simultaneously update at the arrival of the sample clock edge. The application uses the Timed Loop. Solution Use the DAQmx Create Timing ...

Showing 61-70 of 2037 results
7 of 204 pages