Filtered Results

This section contains information about analog triggering for C Series, NI ELVIS II Family, DSA, E Series, M Series, S Series, and SC Express devices.

Not all E Series, M Series, S Series, and C Series devices support analog triggering. Refer to the specifications for your device to determine if your device supports analog triggering. Many C Series, ...

Specifies the name of a virtual channel or terminal where there is an analog signal to use as the source of the Start Trigger. Not supported Not supported in VIs that run in a web application 1398 attr1398.html ...

The following devices support the force, pressure, torque, and bridge (V/V) measurement types for taking measurements from bridge-based sensors: NI FD-11637 PXIe-433x NI 9218 NI 9219 NI 9235 NI 9236 NI ...

CompactRIOcRIO-9040, 9041, 9042, 9043, 9045, 9046, 9047, 9048, 9049, 9053, 9054, 9055, 9056, 9057, and 9058. and CompactRIO Single-Board sbRIO-9603, 9608, 9609, 9628, 9629, and 9638. controllers provide ...

Device calibration consists of verifying the measurement accuracy of a device and adjusting for any measurement error. Verification consists of measuring the performance of the device and comparing these ...

The following tables lists the default input terminals for various counter measurements. You can use a different PFI line for any of the input terminals. To change the PFI input for a measurement, use ...

When you include channels from multiple C Series modules in a task, NI-DAQmx automatically synchronizes the modules. A task can include channels from multiple C Series modules, given the following conditions: ...

Specifies the terminal to which to route the Synchronization Pulse Event. Not supported Not supported in VIs that run in a web application 223C attr223C.html

C Series devices do not support hardware-timed single-point sample mode or Wait for Next Sample Clock. Analog Input Timing Considerations for C Series Devices You can use multiple analog input devices ...

Showing 61-70 of 2037 results
7 of 204 pages