Filtered Results

I am trying to use an SMU to source current or voltage, but I want to simultaneously measure the current and voltage across the load. Is this possible with an SMU? Do I need any additional ammeters or ...

Notice This model is intended for use in indoor applications only. Parent topic: TB-414X Specifications

NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment ...

Your kit includes an assembled TB-414X. In addition, you will need the following items not included in your TB-414X kit to install and use the TB-414X.

This product is subject to control under the U.S. Export Administration Regulations (15 CFR Part 730 et. seq.) administered by the U.S. Department of Commerce's Bureau of Industry and Security (BIS) ( ...

Notice Take precautions to avoid data loss, loss of signal integrity, degradation of performance, or damage to the model. Caution Take precautions to avoid injury. Consult the model documentation for cautionary ...

Caution Isolation voltage ratings apply to the voltage measured between any channel pin and the chassis ground. When operating channels in series or floating on top of external voltage references, ensure ...

Top cover and strain relief screws #4-40 Top cover and strain relief screw torque 0.3 Nm (2.7 lb · in.) Dimensions 112 mm × 74 mm × 19 mm (4.4 in. × 2.9 in. × 0.8 in.) Weight 112 g

Screw terminal wire gauge 24 to 18 AWG Length of bare wire (insulation stripped) from one end of the wire 5 mm to 6 mm (0.197 in. to 0.236 in.) Screw terminal torque 0.5 Nm (4 lb · in.) Spacing

Showing 61-70 of 238 results
7 of 24 pages