From 12:00 AM CDT Sunday, October 17 - 11:30 AM CDT Sunday, October 17, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Filtered Results

I can not connect myRIO to my PC. NI myRIO USB Monitor start page does not appear after connecting myRIO. It does not shown up under Remote Systems in NI MAX, but I can find it in Device Manger as a «USB\VID_3923&PID_762F\XXXXXXXX» ...

I am running my cRIO in Scan Mode but I am encountering the -65512 error. I am concerned that this is effecting the accuracy of my data, how can I fix it? I have a cRIO that uses scan engine only and at ...

Why do I see the following errorwhen I try to run an example real-time VI or my own real-time code? Error 65536 occurred at an unidentified location Possible reason(s): CompactRIO (Hex 0x10000) Unable ...

I am reading from multiple channels on my cRIO and would like to send all of this data to my RT host to be processed, but want to make sure that all of the data is synchronized. How can I do this?

When deploying a system based on CompactRIO, you may be considering using a power supply that provides only the required power output instead of the maximum output possible for a controller. To do this, ...

My CompactRIO system is running off a limited power source, and I need a way to achieve a low-power state. How can I reduce the power consumption of my device?

I have a Real-Time controller deployed in the field that is now occasionally switching to Safe Mode. After several reboots the system will restart in normal mode. Any idea as to why this system is now ...

My FPGA VI has a broken run arrow that points to:I/O Node: Notsupported from current target. Close the VI and reopen it in the Project Explorer window under a target that supports I/O nodes. I am trying ...

I am working with a C Series module or R Series FPGA board with analog inputs and outputs. The I/O Nodes for each device requires a deterministic number of clock ticks, but that number differs for each ...

I have several cDAQ chassis and a cRIO chassis with DAQmx functionality (e.g. cRIO-904x). Can I have these chassis on the same DAQmx task?

Showing 61-70 of 174 results
7 of 18 pages