Filtered Results

When I turn on my PXI(e) controller with the monitor attached, I get a Sync Out of Rangeerror when loading into Windows.

I have multiple PXI(e) controllers and chassis. To save software installation time and effort, I would like to install the required software on one PXI(e) controller, clone the controller image, and deploy ...

I am setting up Real-Time PXI system that includes a DAQ module. How will I access this module and physical channels in LabVIEW? Will I/O be deployed like a cRIO or R Series real-time targets? Why doesn't ...

I bought a new PXI/PXIe real time controller and I would like to start programming it. How do I get started with real time targets programming? What software is required to develop a real-time application ...

I do not see the option to install IVI Compliance Package under Add/Remove Software in NI Measurement & Automation Explorer (NI MAX). How do I install IVI support for my Real-Time target? I have a LabVIEW ...

My PXI controller recently went offline during a power surge and now it will not boot past the BIOS. What can I try to get it working again? My PXI controller has started booting straight to the BIOS instead ...

When booting up my PXI system I get the error:Invalid System Disk, Replace the disk and then press any key. Reboot and select proper boot device or insert boot media in selected boot device and press a ...

When I open a LabVIEW project including a Real-Time target like aCompactRIO (cRIO), CompactDAQ (cDAQ)or Real-Time PXI, I see a yellow exclamation mark next to my target. When I click on the target, I get ...

I know that National Instruments sells controllers with the LabVIEW Real-Time Engine installed on them as an operating system, but I have an existing PXI controller with a Windows operating system on it. ...

I am starting to use the LabVIEW Real-Time Module to program a CompactRIO. I have some existing .NET code that I would like to be able to use. Can I build my .NET code into a DLL and call it from my LabVIEW ...

Will my NI PXI Express (PXIe)controller work with any PXIe chassis? Will my NI PXIcontroller work with any PXIchassis? Can I use a PXIecontroller on a PXI chassisor vice versa?

When I open Vision Builder for Automated Inspection (VBAI), it takes 3 to 4 minutes for the welcome page to show up. I Checked event system log and see the following error: The description for Event ID ...

I am attempting to connect to an NI Real-Time target through a virtual machine. However, I am receiving a message from NI MAX reporting that the target isConnected - Inconsistent IP Settings. Why is this ...

I am using LabVIEW WebDAV API VIs (Simple Get and Simple Put) to transfer files between my computer and my CompactRIO (cRIO)/CompactDAQ (cDAQ)/PXI controller. I am getting Error 56 on larger file transfers, ...

I need to access the serial port on my Real-Time PXI controller. When I go to the controller in the Remote Systems list in NI MAX and then open the Devices and Interfaces list, the serial (COM) port does ...

I want to connect my CompactRIO controller, Compact FieldPoint, PXI controller, (or any real-time target) to a wireless network. What are the considerations for doing this?

I am connecting over a crossover cable to a LabVIEW Real-Time (RT) target from a Windows machine. I am unable to communicate properly with the controller. Am I configuring the system properly?

My CMOS clock on my PXI controller keeps losing its time. At boot-up I get the following error message. Error Message: Warning! Error 0271: Check Date and time Settings Warning! Error 0251: System CMOS ...

If you think that a PXI or VXI hard drive may have failed, you can follow the steps listed in this article to diagnose the PXI or VXI hard drive.

Showing 101-120 of 208 results
6 of 11 pages