Filtered Results

The screen files for each application are not compatible with each other. You cannot convert files from one application to the other. Use the following table to determine the screen application to use ...

Before you begin, import an outgoing CAN frame. Launch the VeriStand Editor. In the Project Files pane, double-click a system definition file (.nivssdf). System Explorer opens. Click Targets Controller ...

Most NI Real-Time targets offer three options for packet detection: Line Interrupt, Polling, and Message Signal Interrupt. Line Interrupt provides the fastest performance as the device driver gets immediately ...

Not all steps are available on every VeriStand license. Create a new VeriStand project—Create a new project in VeriStand to develop, prototype, and test control systems using hardware I/O and simulation ...

The timing watchdog is controlled by the Watchdog Timer Loop. This loop executes at a rate of 10 Hz and at a lower priority than the other loops in the VeriStand Engine. The Watchdog Timer Loop executes ...

Before you begin, you will need the IP address of the host that you want to run the VeriStand Gateway. On the host that you want to connect, open the VeriStand Editor. In the Navigation pane, click Project ...

Connecting to a target deploys the system definition to the target. You must define the target in the system definition before connecting to a new target. Otherwise, you must undeploy the system definition ...

Before you begin, you must deploy the system definition to a real-time target. Open a project in VeriStand. In the VeriStand Editor, select Operate Connect .

Group and organize controls and indicators. When Should I Use a Tab Control? Tab controls are useful when you have several panel objects that are used together or during a specific phase of operation. ...

The following image depicts the Simulink conversion process at a high level. Steps of the Simulink Conversion ProcessThe Simulink software performs the following steps when you compile a model: The MathWorks, ...

Before you begin, adapt the C template to your model code and determine which real-time (RT) operating system your RT target runs. For your model code to work with the VeriStand Model Framework, create ...

Create a header file and name it model.h. Create code in the file similar to the following code. #ifndef MODEL_h # define MODEL_h typedef struct { double a[2][2]; double b11; double c12; double idleRPM; ...

Which modeling environments produce models that are compatible with VeriStand? VeriStand can run models from several environments after the models are compiled to work with the VeriStand Model Framework. ...

When should I use raw frame data logging for NI-XNET CAN interfaces?Raw frame logging for CAN interfaces is useful when you need the exact timestamps of when messages are sent and received from the hardware. ...

A software fault insertion allows you to test the behavior of a system when a channel reaches a certain value. Use the following functions to perform a software fault insertion. The fault(x,c) function ...

The Functional Mockup Interface (FMI) is an API standardization for exchanging dynamic system models. You can use FMI to decouple modeling environments from model consumers. This decoupling helps create ...

Based on your use case, use the following column headers in your CSV file. Use Case Column header Description All timestamp Specifies the relative time from the start of the test, in milliseconds. This ...

Create a real-time sequence. Add a Generate Errors primitive to the sequence code. This primitive also allows you to stop the sequence and skip to the clean-up tasks or to immediately abort the sequence ...

A DIAdem report file can display graphs, texts, and images based on the data from the loaded log files. Click Edit settings on the data logging control. Select Post-Processing. From the Report generation ...

In Time-Based Synchronization, each piece of time-based hardware shares a common wall-clock time reference. For test and measurement hardware, there are many industry standards for time such as IEEE 1588, ...

Showing 101-120 of 353 results
6 of 18 pages