Filtered Results

Initiates an acquisition, waits for it to complete, and retrieves the data for multiple channels and records. Not supported Not supported in VIs that run in a web application session in Handle that identifies ...

Initiates an acquisition, waits for it to complete, and performs the specified waveform measurement for multiple channels and records. Not supported Not supported in VIs that run in a web application session ...

Initiates an acquisition, waits for it to complete, and retrieves the data for a single channel and record. Not supported Not supported in VIs that run in a web application session in Handle that identifies ...

Returns the waveform the digitizer acquires for the specified channel. This function initiates an acquisition that returns a scaled voltage waveform in a waveform data type that includes timing information. ...

Initiates an acquisition, waits for it to complete, and acquires data.

Performs a hard reset of the device. During a hard reset, acquisition stops, all routes are released, RTSI and PFI lines are tri-stated, FPGAs are reset, hardware is configured to its default state, and ...

Resets the oscillator to a known state and resets session attributes to values specified in the IVI configuration store. This function uses default parameters to perform a software reset on the device. ...

Resets the digitizer to its default state. Not supported Not supported in VIs that run in a web application session in Handle that identifies the NI-SCOPE instrument session as previously allocated by ...

Returns the revision numbers of the instrument driver and instrument firmware. Not supported Not supported in VIs that run in a web application session in Handle that identifies the NI-SCOPE instrument ...

Self-calibrates most NI digitizers, including all SMC-based devices and most Traditional NI-DAQ (Legacy) devices. Not supported Not supported in VIs that run in a web application Self-Calibrating SMC-Based ...

Showing 51-60 of 131 results
6 of 14 pages