I would like to test my M Series device in NI-DAQmx to verify that the analog outputs and analog inputs are working. Are there any special channels I should use for diagnostics?

I am recording measurements from a multifunction I/O device. Currently, Iam using the DAQ Assistant to read a number of samples and output them on a graph. This happens inside a loop to read samples continuously. ...

I am running an application that is working with other cards in other computers. When I run it on this computer I get Error-200478 DAQmx Start Task.vi: 1Task Name: _unnamedTask<8>for an ...

Why do I receive Error -200558 whenI try to use a task that contains multiple DAQ devices? One task cannot contain multiple independent devices. Create one task for each independent device.

The PXI(e) card in my chassis will not perform a Self-Calibration in NI MAX. I'm getting the following error message: Status Code: -201295 Device could not complete the calibration operation. Calibration ...

I am using the Pulse Measurement Counter Input tasks in DAQmx with my DAQ device and I am getting the following error at DAQmx Create Channel VI: Error -200431 occurred at DAQmx Create Channel (CI-Pulse ...

I want to know the error associated with the "Non-Linearity" of my DAQ device. What are the INL and DNL errors in the specifications of my DAQ device?

While reading the specifications of my DAQ device, I found a terminology called Absolute Accuracy at Full Scale. What is the meaning of Absolute Accuracy at Full Scale and how can I calculate it?

How do I measure current with an analog voltage input? Do I need a shunt resistor in my current measurement circuit?

I am encountering error -200077 with a DAQmx VI: Error -200077 Requested value is not a supported value for this property. The property value may be invalid because it conflicts with another property. ...