Filtered Results

Error -50200 occurred at DAQmx Create Timing Source VI when implemented on a NI Linux RT cDAQ-9137. Error -50200 occurred at DAQmx Create Timing Source (Control Loop From Task).vi:6770001 Possible reason(s): ...

I'm not getting the P2P transfer rate I expect. What do I configure? My P2P application works fine with a PXIe-8135 controller, but suffers reduced throughput with another controller such as PXIe-8133, ...

I tried to install NI VeriStand Engine on my PXI controller running PharLap ETS and I got the following error message: Cannot continue because of the following unresolved dependencies: NI VeriStand Engine ...

I still want to limit access into the BIOS with a password, but I do not want the controller to prompt the user for a BIOS password on startup.

This tutorial discusses communication between a host PC, or HMI, and a private network target, which is connected to the secondary port of a dual Ethernet port LabVIEW Real-Time controller. Ethernet port ...

This tutorial walks through the process of adding a Real-Time PXI Controller running PharLap to Measurement & Automation Explorer, specifying an IP address and adding necessary software. Note:This only ...

I want to use VPN for security of the communication. How can I build the VPN network with NI Linux Real-Time target?

When I open one of the examples VI, which is installed with the driver for my PXI or PXIe card, the drop down menu for physical channel does not show the card in my real-time PXI system. The drop down ...

I have a windows 10 PXIe controller that has Acronis TrueImage pre-loaded on it. I used the recovery tool to restore my machine to a factory state, however when I try to do it again, Acronis is not able ...

Showing 51-60 of 160 results
6 of 16 pages