Filtered Results

I want to use both Windows 10 and PharLapRT (Real-Time) OS on my PXIe Controller. I have a Windows 10 installed, and would like to try dual booting, I divided the partition as FAT 32 for PharLap RT OS, ...

Will my NI PXI Express (PXIe)controller work with any PXIe chassis? Will my NI PXIcontroller work with any PXIchassis? Can I use a PXIecontroller on a PXI chassisor vice versa?

I have connected my CompactRIO/Single Board RIO/R Series to the computer and it is detected in the Measurement and Automation Explorer (MAX) appropriately. However, I am not able to add the cRIO to my ...

When booting up my PXI system I get the error:Invalid System Disk, Replace the disk and then press any key. Reboot and select proper boot device or insert boot media in selected boot device and press a ...

I am using LabVIEW WebDAV API VIs (Simple Get and Simple Put) to transfer files between my computer and my CompactRIO (cRIO)/CompactDAQ (cDAQ)/PXI controller. I am getting Error 56 on larger file transfers, ...

I need to access the serial port on my Real-Time PXI controller. When I go to the controller in the Remote Systems list in NI MAX and then open the Devices and Interfaces list, the serial (COM) port does ...

When I open Vision Builder for Automated Inspection (VBAI), it takes 3 to 4 minutes for the welcome page to show up. I Checked event system log and see the following error: The description for Event ID ...

My PXI controller recently went offline during a power surge and now it will not boot past the BIOS. What can I try to get it working again? My PXI controller has started booting straight to the BIOS instead ...

I know that National Instruments sells controllers with the LabVIEW Real-Time Engine installed on them as an operating system, but I have an existing PXI controller with a Windows operating system on it. ...

I do not see the option to install IVI Compliance Package under Add/Remove Software in NI Measurement & Automation Explorer (NI MAX). How do I install IVI support for my Real-Time target? I have a LabVIEW ...

I have lost or otherwise cannot use my Windows OS re-installation disk that was sent with my Windows PXI controller. Can NI replace this disk?

I have an application that uses the System Configuration API. When I run my application on my Real-Time target, LabVIEW throws error 15 or error -2147467261 after the Initialize Session VI, as described ...

Every hour and a half of running my Real-Time code I get the following error: (Hex 0x661) The LabVIEW Real-Time process encountered an error and restarted automatically.

I want to connect my CompactRIO controller, Compact FieldPoint, PXI controller, (or any real-time target) to a wireless network. What are the considerations for doing this?

I have a PXI controller that I would like to run real-time (RT) applications on. I know National Instruments sells multiple PXI RT controllers, but is there any way to modify my existing controller? Is ...

When I turn on my PXI(e) controller with the monitor attached, I get a Sync Out of Rangeerror when loading into Windows.

I am attempting to connect to an NI Real-Time target through a virtual machine. However, I am receiving a message from NI MAX reporting that the target isConnected - Inconsistent IP Settings. Why is this ...

I have multiple PXI(e) controllers and chassis. To save software installation time and effort, I would like to install the required software on one PXI(e) controller, clone the controller image, and deploy ...

I am starting to use the LabVIEW Real-Time Module to program a CompactRIO. I have some existing .NET code that I would like to be able to use. Can I build my .NET code into a DLL and call it from my LabVIEW ...

Showing 81-100 of 352 results
5 of 18 pages