Filtered Results

I'm using a data acquisition device and I've seen the parameters Channel-to-earth isolation and Crosstalk. How are these parameters are related?

I would like to accurately measure voltages between 14 V and 18 V. Is it possible to use a normal data acquisition +/-10V module to do this?

I am looking for a DAQ board with a certain maximum range. I understand that many boards have a maximum analog input voltage range of ±10 V, but are there other maximum voltage ranges available?

I want to output a chirp signal through my DAQ device in LabVIEW. Is there a way I can easily create a Chirp Signal in LabVIEW? Are there any considerations that need to be taken into account?

My DAQ device uses scatter-gather DMA to get data from the board to my computer, what does this mean?

I want to know the frequency resolution of the analog output on my DAQ device. Can I calculate this myself, or is there an available approximation I can use instead?

This article outlines methods for troubleshooting and isolating the causes of measurement offset and noise in Multifunction I/O DAQ hardware.

I built a LabVIEWapplication and the behavior is not the same as in the development environment. The executable does not show any error, butit does not work correctly. I built an executable in LabVIEW ...

I am running an application that is working with other cards in other computers. When I run it on this computer I get Error-200478 DAQmx Start Task.vi: 1Task Name: _unnamedTask<8>for an ...

In the Datasheet for my product, I see a section titled Input Coupling, and it is specifies AC, DC, or "AC or DC."What are do each of these input coupling types mean? Does my module support DC voltage? ...

I am using some Digital Input (DI) lines on aNI-USB 621x device. How should the ground pins be connected? Can I connect a Digital Ground (D GND) pinon a NI USB-621x to an external ground reference? What ...

... Reference NI PCIe-6361 Supported Properties Tags: API Reference C NI-DAQmx >NI PCIe-6361 Supported Properties DAQmx Buffer Properties ...

... PCIe-6353 PCIe-6361 PCIe-6363 PCMCIA-6715 PXI-5114 PXI-5421 ... PCI-6070E PCIe-6361 PCI-MIO-16E-1 PXI-4070 PXI-4071 PXI-4072 ...

This is the Letter of Volatility for the NI PCIE-6351/53/61/63.

... Reference NI PCIe-6361 Supported Properties Tags: API Reference ... C >NI PCIe-6361 Supported Properties DAQmx Buffer Properties ...

Showing 81-100 of 184 results
5 of 10 pages