Filtered Results

Specifies the initial size of a named waveform so that it can be allocated in onboard memory before loading the associated data. Not supported Not supported in VIs that run in a web application After this ...

Creates an arbitrary sequence from an array of waveform references and an array of corresponding loop counts with the ability to set the number of samples in each sequence step and to set marker locations. ...

Use the NI-FGEN analog output nodes only when following the calibration DC gain and offset portion of the waveform generator calibration procedure.

Use the NI-FGEN arbitrary waveform nodes to configure, define, and clear an arbitrary waveform.

Use the NI-FGEN arbitrary sequence waveform nodes to configure, define, and clear an arbitrary sequence.

Changes the password that is required to initialize an external calibration session. Not supported Not supported in VIs that run in a web application niFgen Change Ext Cal Password.vi :/nifgenlv.chm::/niFgen_Change_Ext_Cal_Password.html ...

Removes a previously created arbitrary sequence from the waveform generator memory and invalidates the handle of the specified arbitrary sequence. The waveform generator must not be in the Generating state ...

Removes a previously created frequency list from the waveform generator memory and invalidates the handle of the specified frequency list. The waveform generator must not be in the Generating state when ...

Use the NI-FGEN clock nodes to configure waveform generator clocking and data generation speed.

Takes waveform data from a specified Hierarchical Waveform Storage (HWS) file and creates an onboard waveform for use in arbitrary waveform or arbitrary sequence output modes. The waveform generator must ...

Showing 41-50 of 140 results
5 of 14 pages