From 12:00 AM CDT Sunday, October 17 - 11:30 AM CDT Sunday, October 17, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Filtered Results

My FPGA code runs for a few seconds, then disconnects with the following error. I am trying to read data from my FPGA using either the FIFO Read or the FPGA Read method. I get the following error. Error ...

I have a cRIO application in the field that had been running continuously for months without any problems. However, last week I got the error -1950679023, causing the application to stop. Afterwards the ...

I am developing an application that will be distributed to a remote location and I want to monitor hardware and system resources for predictive maintenance. What self-diagnostics options are available ...

I can not connect myRIO to my PC. NI myRIO USB Monitor start page does not appear after connecting myRIO. It does not shown up under Remote Systems in NI MAX, but I can find it in Device Manger as a «USB\VID_3923&PID_762F\XXXXXXXX» ...

I am running my cRIO in Scan Mode but I am encountering the -65512 error. I am concerned that this is effecting the accuracy of my data, how can I fix it? I have a cRIO that uses scan engine only and at ...

Why do I see the following errorwhen I try to run an example real-time VI or my own real-time code? Error 65536 occurred at an unidentified location Possible reason(s): CompactRIO (Hex 0x10000) Unable ...

I am reading from multiple channels on my cRIO and would like to send all of this data to my RT host to be processed, but want to make sure that all of the data is synchronized. How can I do this?

When deploying a system based on CompactRIO, you may be considering using a power supply that provides only the required power output instead of the maximum output possible for a controller. To do this, ...

My CompactRIO system is running off a limited power source, and I need a way to achieve a low-power state. How can I reduce the power consumption of my device?

I have a Real-Time controller deployed in the field that is now occasionally switching to Safe Mode. After several reboots the system will restart in normal mode. Any idea as to why this system is now ...

Showing 41-50 of 214 results
5 of 22 pages