Filtered Results

The PXI(e) card in my chassis will not perform a Self-Calibration in NI MAX. I'm getting the following error message: Status Code: -201295 Device could not complete the calibration operation. Calibration ...

My DAQ device uses scatter-gather DMA to get data from the board to my computer, what does this mean?

I want to know the error associated with the "Non-Linearity" of my DAQ device. What are the INL and DNL errors in the specifications of my DAQ device?

While reading the specifications of my DAQ device, I found a terminology called Absolute Accuracy at Full Scale. What is the meaning of Absolute Accuracy at Full Scale and how can I calculate it?

I want more precision on my DAQ device. Can I use a smaller voltage range to get more precision with my analog input?

The following devices support programmable power up states: 6509 651x (6512, 6513, 6514, 6515) 652x (6525, 6527, 6528), All M Series boards (62xx) All X Series boards (63xx) You can set power-up states ...

I know that bias resistors should be used when measuring floating sources with differential input or nonreferenced single-ended (NRSE) input systems. However, I am not sure what resistance values I should ...

This document is part of the Getting Started with NI-DAQmx Series. A Pulse Width Modulation (PWM) Signal is a technique for generating digital pulses to control an analog circuit. A PWM signal consists ...

How do I measure current with an analog voltage input? Do I need a shunt resistor in my current measurement circuit?

I have multiple NI data acquisition (DAQ) devices. When I acquire data (DAQmx Read (VI) multiple channels) and then merge them in to one TDMS file by usingTDMS Write Function, the resulting file volume ...

Showing 41-50 of 328 results
5 of 33 pages