Filtered Results

I am installing software on my PharLap Real-Time controller and I have been able to install some drives, but NI-SWITCH does not show up on NI MAX in the list of software I can install.

This tutorial walks through the process of adding a Real-Time PXI Controller running PharLap to Measurement & Automation Explorer, specifying an IP address and adding necessary software. Note:This only ...

This tutorial discusses communication between a host PC, or HMI, and a private network target, which is connected to the secondary port of a dual Ethernet port LabVIEW Real-Time controller. Ethernet port ...

I have a RT application running on a Real Time PXI controller in which I am routing custom messages about the application status to a monitor. For this I am using RT Debug String VI with Interface input ...

The LabVIEW Real-Time Module has the ability to target both PXI controllers and standard desktops. These systems differ from other hardware platforms in that they provide graphical output. After initial ...

I have a PXI(e) controller with Windows/Real-Time OS andI would like to program the USER LEDs on my controller to depict thesystem/application state. However, I am not able to find any LabVIEW APIthat ...

My application (created in LabVIEW) was reading/writing from/to files in my cRIO controller when a power failure occurred. After my system rebooted, I got some corrupted files. How can fix or prevent this? ...

The Console Viewer tool displays the console output for an RT target. Console output might include information about system definition deployment, CPU usage, and debugging messages. This tool is useful ...

I would like to dual-boot my RT-capable PXI controller with Windows 7 and LabVIEW Real-Time. How can I do this?

I want to use both Windows 10 and PharLapRT (Real-Time) OS on my PXIe Controller. I have a Windows 10 installed, and would like to try dual booting, I divided the partition as FAT 32 for PharLap RT OS, ...

Will my NI PXI Express (PXIe)controller work with any PXIe chassis? Will my NI PXIcontroller work with any PXIchassis? Can I use a PXIecontroller on a PXI chassisor vice versa?

I have connected my CompactRIO/Single Board RIO/R Series to the computer and it is detected in the Measurement and Automation Explorer (MAX) appropriately. However, I am not able to add the cRIO to my ...

When booting up my PXI system I get the error:Invalid System Disk, Replace the disk and then press any key. Reboot and select proper boot device or insert boot media in selected boot device and press a ...

I am using LabVIEW WebDAV API VIs (Simple Get and Simple Put) to transfer files between my computer and my CompactRIO (cRIO)/CompactDAQ (cDAQ)/PXI controller. I am getting Error 56 on larger file transfers, ...

I need to access the serial port on my Real-Time PXI controller. When I go to the controller in the Remote Systems list in NI MAX and then open the Devices and Interfaces list, the serial (COM) port does ...

When I open Vision Builder for Automated Inspection (VBAI), it takes 3 to 4 minutes for the welcome page to show up. I Checked event system log and see the following error: The description for Event ID ...

My PXI controller recently went offline during a power surge and now it will not boot past the BIOS. What can I try to get it working again? My PXI controller has started booting straight to the BIOS instead ...

I know that National Instruments sells controllers with the LabVIEW Real-Time Engine installed on them as an operating system, but I have an existing PXI controller with a Windows operating system on it. ...

I do not see the option to install IVI Compliance Package under Add/Remove Software in NI Measurement & Automation Explorer (NI MAX). How do I install IVI support for my Real-Time target? I have a LabVIEW ...

I have lost or otherwise cannot use my Windows OS re-installation disk that was sent with my Windows PXI controller. Can NI replace this disk?

Showing 61-80 of 183 results
4 of 10 pages