Filtered Results

Adjusts the external calibration constants for an SCXI-1122 module. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust SCXI 1122 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Adjusts the external calibration constants for an SCXI-1126 module. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust SCXI 1126 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) that use a Wheatstone bridge to measure pressure. Use this instance with sensors whose specifications provide a table of electrical values and the corresponding physical values. When ...

Creates channel(s) to measure strain. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Strain-Strain Gage).vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) to measure voltage. If the measurement requires the use of internal excitation or you need excitation to scale the voltage, use the Custom Voltage with Excitation measurement type for ...

Creates channels to measure two-dimensional strain using a rosette strain gage. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Strain-Rosette ...

Reads one or more raw, 8-bit unsigned integer samples from a task. Use this instance with devices that use 8-bit unsigned integers as the internal representation of a sample. LabVIEW NXG does not support ...

Reads one or more 8-bit unsigned integer samples from a task that contains a single digital input channel. Use an instance that reads 8-bit unsigned integers for devices with up to eight lines per port. ...

Sets only the number of samples to acquire or generate without specifying timing. Typically, you should use this instance when the task does not require sample timing, such as tasks that use counters for ...

Creates channel(s) that use a Wheatstone bridge to measure torque. Use this instance with sensors whose specifications provide a polynomial to convert electrical values to physical values. When you use ...

Creates channel(s) that use a Wheatstone bridge to measure torque. Use this instance with sensors whose specifications do not provide a polynomial for scaling or a table of electrical and physical values. ...

Creates channel(s) that use an IEPE velocity sensor to measure velocity. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Velocity-IEPE ...

Specifies the source of the DAC offset voltage. The value of this voltage source determines the full-scale value of the DAC. Not supported Not supported in VIs that run in a web application Internal 10200 ...

Specifies the maximum instantaneous sound pressure level you expect to measure. This value is in decibels, referenced to 20 micropascals. NI-DAQmx uses the maximum sound pressure level to calculate values ...

Specifies whether to increment or decrement the counter on each edge. Not supported Not supported in VIs that run in a web application Count Up 10128 Increment counter. Count Down 10124 Decrement counter. ...

Specifies the logic level behavior on the input line. Not supported Not supported in VIs that run in a web application Logic Level Pull-up 16064 High logic. None 10230 Supply no excitation to the channel. ...

Specifies the amount of attenuation to use. Not supported Not supported in VIs that run in a web application 1801 attr1801.html

Indicates the version number of the sensor. Not supported Not supported in VIs that run in a web application 21DD attr21DD.html

Showing 61-80 of 2088 results
4 of 105 pages