Filtered Results

Retrieves the custom coefficients for the equalization FIR filter on the device. This filter is designed to compensate the input signal for artifacts introduced to the signal outside of the device. Because ...

Gets the frequency response of the digitizer for the current configurations of the channel attributes. This node can be used only with high-speed digitizers that support onboard signal processing (OSP). ...

Extracts a session that can be passed to NI-TClk nodes. Not supported Not supported in VIs that run in a web application session in Handle that identifies the NI-SCOPE instrument session as previously ...

Returns the effective sample rate, in samples per second, of the acquired waveform using the current configuration. Not supported Not supported in VIs that run in a web application session in Handle that ...

Returns a writer endpoint that can be used with NI-P2P to configure a peer-to-peer stream with a digitizer endpoint. Not supported Not supported in VIs that run in a web application session in Handle that ...

Returns coefficients that can be used to convert binary data to normalized and calibrated data. Not supported Not supported in VIs that run in a web application session in Handle that identifies the NI-SCOPE ...

Returns coefficients that can be used to scale binary data to volts. Not supported Not supported in VIs that run in a web application session in The instrument handle that you obtain from Initialize External ...

Performs initialization actions with extra options. This node performs the following initialization actions: Creates a new IVI instrument driver and, optionally, sets the initial state of the following ...

Initiates a waveform acquisition. After you call this function, the digitizer leaves the Idle state and waits for a trigger. The digitizer acquires a waveform for each channel you enable with Configure ...

Showing 31-40 of 131 results
4 of 14 pages