Filtered Results

Specifies the terminal of the signal to use as the timebase of the digital filter. Not supported Not supported in VIs that run in a web application 2F01 attr2F01.html

Specifies in hertz the rate of the pulse width filter timebase. NI-DAQmx uses this value to compute settings for the filter. Not supported Not supported in VIs that run in a web application 2221 attr2221.html ...

Specifies the input terminal of the signal to use as the timebase of the pulse width filter. Not supported Not supported in VIs that run in a web application 2220 attr2220.html

Specifies whether to synchronize recognition of transitions in the signal to the internal timebase of the device. This property does not affect the minimum pulse width recognized by the device, but setting ...

Indicates the maximum Sample Clock rate supported by the task, based on other timing settings. For output tasks, the maximum Sample Clock rate is the maximum rate of the DAC. For input tasks, NI-DAQmx ...

Specifies whether the exported Sample Clock issues a pulse at the beginning of a sample or changes to a high state for the duration of the sample. Some devices might require many AI Convert Clock pulses ...

Specifies the terminal to which to route the Sample Clock. Not supported Not supported in VIs that run in a web application 1663 attr1663.html

Specifies the action to take if Sample Clock edges occur faster than the device can handle them. Not supported Not supported in VIs that run in a web application Stop Task And Error 15862 Stop task and ...

Specifies the polarity of the exported Sample Clock if SampClk.OutputBehavior is Pulse. Not supported Not supported in VIs that run in a web application Active High 10095 High state is the active state. ...

Specifies the sampling rate in samples per channel per second. If you use an external source for the Sample Clock, set this input to the maximum expected rate of that clock. Not supported Not supported ...

Showing 31-40 of 2037 results
4 of 204 pages