Filtered Results

The following table lists the POWER LED indicators. Table 7. POWER LED Indicators LED Pattern Indication Solid The NI 9149 is powered on. Off The NI 9149 is powered off. Parent topic: LEDs

The NI 9149 has a power connector to which you can connect a power supply. The following table shows the pinout for the power connector. Table 4. Power Connector Pinout Pinout Pin Description V C V Power ...

Press the RESET button to reset the processor in the same manner as cycling power. Parent topic: Buttons

Complete the following steps to connect the NI 9149 to a host computer or Ethernet network using the RJ-45 Gigabit Ethernet port 1. NI recommends using the RJ-45 Gigabit Ethernet port 1 for communication ...

The following table describes the STATUS LED indicators. Table 8. STATUS LED Indicators LED Pattern Indication Blinks twice and pauses The NI 9149 is in safe mode. Software is not installed, which is the ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

The following figure shows the surface mounting dimensions for the NI 9149 . Figure 8. NI 9149 Surface Mounting Dimensions 47.2 mm (1.86 in.) 141.7 mm (5.58 in.) 30.8 mm (1.21 in.) 47.0 mm (1.85 in.) 4.1 ...

The following figure shows the reset behavior of the NI 9149 . Figure 1. Reset Button Behavior Press and hold RESET button for ≥ 5 s Press and hold RESET button for < 5 s Run Mode Safe Mode Press

This document describes the features of the NI 9149 and contains information about mounting and operating the device. + + + + RJ-45 Ethernet1 256 MB DDR3 512 MB NAND Flash GigE MAC/PHY Xilinx Zynq-7000 ...

Showing 31-40 of 94 results
4 of 10 pages