Filtered Results

Quantization error is the inherent uncertainty in digitizing an analog value as a result of the finite resolution of the conversion process. Quantization error depends on the number of bits in the converter, ...

Configures TDMS file logging for the task. To maximize performance and to minimize file size, DAQmx TDMS files store raw data and scaling information separately, and do not need defragmentation. Attempting ...

Creates a channel that uses an angular encoder to measure angular position. With the exception of devices that support multi-counter tasks, you can create only one counter input channel at a time with ...

Creates a channel that uses a linear encoder to measure linear position. With the exception of devices that support multi-counter tasks, you can create only one counter input channel at a time with this ...

Creates a channel that uses a linear encoder to measure linear velocity. With the exception of devices that support multi-counter tasks, you can create only one counter input channel at a time with this ...

Indicates the maximum digital output rate of the device. Not supported Not supported in VIs that run in a web application 299A attr299A.html

Specifies from which electrical unit to scale data. Select the same unit that the sensor data sheet or calibration certificate uses for electrical values. Not supported Not supported in VIs that run in ...

Specifies the kind of the waveform to generate. Not supported Not supported in VIs that run in a web application Sine 14751 Sine wave. Triangle 14752 Triangle wave. Square 14753 Square wave. Sawtooth 14754 ...

Specifies the logic level behavior on the input line. Not supported Not supported in VIs that run in a web application Logic Level Pull-up 16064 High logic. None 10230 Supply no excitation to the channel. ...

Specifies in hertz the rate of the pulse width filter timebase. NI-DAQmx uses this value to compute settings for the filter. Not supported Not supported in VIs that run in a web application 30E3 attr30E3.html ...

Specifies on which edge of a clock pulse sampling takes place. This property is useful primarily when the signal you use as the Sample Clock is not a periodic clock. Not supported Not supported in VIs ...

Specifies if a task acquires or generates a finite number of samples or if it continuously acquires or generates samples. For an analog input task with a Reference Trigger, you must set this property to ...

In physical channel names, cDAQ1Mod1 is the default device name for a C Series device plugged into a USB or Standalone NI CompactDAQ chassis, where cDAQ1 is the default chassis device name, and Mod1 refers ...

Encoders typically use a third signal for Z indexing, which produces a pulse at fixed positions that you can use for precise determination of a reference position. For instance, if the Z index is 45° for ...

8255-based devices that perform handshaking support four handshaking signals: Strobe Input (STB) Input Buffer Full (IBF) Output Buffer Full (OBF) Acknowledge Input (ACK) Use the STB and IBF signals for ...

Adjusts the external calibration constants for an NI 9230 device. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust 9230 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Creates a timing source that uses a combination of the sample clock and the specified sleep time to determine when to send ticks to a Timed Loop. You must create an analog input task that uses sample clock ...

Creates channel(s) that use an IEPE force sensor to measure force or load. You must configure the physical channel(s) with TEDS information to use this VI. LabVIEW NXG does not support FPGA devices Not ...

Creates channel(s) that use an RVDT to measure angular position. You must configure the physical channel(s) with TEDS information to use this VI. LabVIEW NXG does not support FPGA devices Not supported ...

Returns the reference voltage values to be measured by a reference device. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Get 9269 Calibration Adjustment ...

Showing 41-60 of 2088 results
3 of 105 pages