Filtered Results

Specifies in seconds the minimum pulse width the filter recognizes. Not supported in VIs that run in a web application 221F attr221F.html

Specifies the lower limit of the window. Specify this value in the units of the measurement or generation. Not supported in VIs that run in a web application 1402 attr1402.html

In physical channel names, cDAQ1Mod1 is the default device name for a C Series device plugged into a USB or Standalone NI CompactDAQ chassis, where cDAQ1 is the default chassis device name, and Mod1 refers ...

Your device uses software calibration to adjust the software scaling of signals read from and produced by your device. Using a precise reference signal, your device measures and calculates scaling constants ...

Excitation The FD-11637 supports internal excitation at 3 V, 5 V, and 10 V. 10 V excitation is only supported in Full-Bridge and Half-Bridge modes. Quarter-Bridge Completion The FD-11637 supports internal ...

The following devices support pulse measurements: Parallel digital I/O modules connected to cDAQ-9132, 9133, 9134, 9135, 9136, 9137, 9138, 9139, 9171, 9174, 9178, 9179, 9181, 9184, 9185, 9188, 9188XT, ...

Periodic digital edges measure time and are called clocks. Clocks such as a sample timebase clock and the 20 MHz timebase clock mark the passing of time or are used to align other signals in time. Clocks ...

Creates a channel that uses an angular encoder to measure angular position. With the exception of devices that support multi-counter tasks, you can create only one counter input channel at a time with ...

Creates a route between a source and destination terminal. The route can carry a variety of digital signals, such as triggers, clocks, and hardware events. The source and destination terminals can be on ...

Alters the state of a task according to the action you specify. If error in indicates that an error occurred previously, this node executes normally if action is unreserve or abort. LabVIEW NXG does not ...

Creates channel(s) that use an IEPE force sensor to measure force or load. You must configure the physical channel(s) with TEDS information to use this VI. LabVIEW NXG does not support FPGA devices Not ...

Creates channel(s) that use an RTD to measure temperature. You must configure the physical channel(s) with TEDS information to use this VI. LabVIEW NXG does not support FPGA devices Not supported in VIs ...

Creates channel(s) that use an eddy current proximity probe to measure position. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Position-EddyCurrentProxProbe).vi ...

Creates channel(s) to measure resistance. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Resistance).vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) to measure strain. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Strain-Strain Gage).vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) that use a thermocouple to measure temperature. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Temperature-Thermocouple).vi ...

Creates channel(s) that use an accelerometer to measure acceleration. You must configure the physical channel(s) with TEDS information to use this VI. LabVIEW NXG does not support FPGA devices Not supported ...

Creates channel(s) that measure a Wheatstone bridge. You must configure the physical channel(s) with TEDS information to use this VI. Use this instance with bridge-based sensors that measure phenomena ...

Creates channel(s) to measure strain. You must configure the physical channel(s) with TEDS information to use this VI. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application ...

Creates channel(s) that use a Wheatstone bridge to measure force or load. Use this instance with sensors, whose specifications do not provide a polynomial for scaling, or a table of electrical and physical ...

Showing 41-60 of 1955 results
3 of 98 pages