Filtered Results

Specifies the type of Handshake Trigger to use. Not supported Not supported in VIs that run in a web application Interlocked 12549 Use the Handshake Trigger as a control signal for asynchronous handshaking, ...

Specifies the number of seconds to delay after the Handshake Trigger deasserts before asserting the Handshake Event. Not supported Not supported in VIs that run in a web application 22BC attr22BC.html

Specifies the asserted level of the exported Handshake Event if HshkEvent.OutputBehavior is Interlocked. Not supported Not supported in VIs that run in a web application High 10192 High state. Low 10214 ...

Specifies to assert the Handshake Event when the task starts if HshkEvent.OutputBehavior is Interlocked. Not supported Not supported in VIs that run in a web application 22BE attr22BE.html

Specifies the polarity of the exported Reference Trigger. Not supported Not supported in VIs that run in a web application Active High 10095 High state is the active state. Active Low 10096 Low state is ...

Specifies the point in the buffer at which to write data. If you also specify an offset with Offset, the write operation begins at that offset relative to this point you select with this property. Not ...

Specifies whether DAQmx Read returns late errors or warnings when it detects missed Sample Clock pulses. This setting does not affect DAQmx Wait for Next Sample Clock. Set this property to TRUE for applications ...

Specifies on which edge of a clock pulse sampling takes place. This property is useful primarily when the signal you use as the Sample Clock is not a periodic clock. Not supported Not supported in VIs ...

Specifies in seconds the minimum pulse width the filter recognizes. Not supported Not supported in VIs that run in a web application 2F00 attr2F00.html

Specifies whether to apply the pulse width filter to the signal. Not supported Not supported in VIs that run in a web application 221E attr221E.html

Showing 21-30 of 2037 results
3 of 204 pages