Filtered Results

Put the cRIO-904 x in safe mode and enable the RS-232 serial port by holding the RESET button down for 5 seconds. The STATUS LED starts blinking three times every few seconds. Use the RS-232 serial port ...

If you do not currently have any NI software installed on your host computer, see the Install Software section for details on required software and in which order to install it. If you have some NI software ...

Verify that the following items are included in the cRIO-904 x controller kit. Figure 1. cRIO-904 x Kit Contents 1 3 4 6 8 5 7 2 Controller (4-Slot or 8-Slot) USB Type-A Male to USB Type-C Male Cable Power ...

Complete the following steps to deploy your C Series module in a new program mode in MAX. Launch MAX on the host computer. Expand Remote Systems in the configuration tree and locate your cRIO-904 x system. ...

Add an exception for MAX to your network firewall or other security software by completing the following steps: On Windows 7, select Start » Control Panel » System and Security » Windows Firewall » Allow ...

The cRIO-904 x has the following connectors, LEDs, and buttons. For a full description of all front panel features, see the cRIO-904x User Manual . Figure 2. cRIO-904 x Front Panel 13 14 1 2 3 4 5 6 7

Complete the following steps to connect the cRIO-904 x to the host computer using the Dual Role USB C Port. Power on the host computer. Connect the cRIO-904 x to the host computer using the USB-to-Type-A ...

Showing 21-30 of 598 results
3 of 60 pages