Filtered Results

Specifies whether to enable the digital filter for the line(s) or port(s). You can enable the filter on a line-by-line basis. You do not have to enable the filter for all lines in a channel. Not supported ...

Specifies whether to enable bus mode for digital filtering. If you set this property to TRUE, NI-DAQmx treats all lines that use common filtering settings as a bus. If any line in the bus has jitter, all ...

Specifies the number of samples the input buffer can hold for each channel in the task. Zero indicates to allocate no buffer. Use a buffer size of 0 to perform a hardware-timed operation without using ...

Specifies in hertz the rate of the digital filter timebase. NI-DAQmx uses this value to compute settings for the filter. Not supported Not supported in VIs that run in a web application 2ED5 attr2ED5.html ...

Indicates the virtual channels that have detected samples outside the upper or lower limits configured for each channel in the task. You must read InputLimitsFaultChansExist before you read this property. ...

Indicates if the device or devices detected a sample that was outside the upper or lower limits configured for each channel in the task. Reading this property clears the input limits fault channel status ...

Indicates whether the channel is a global channel. Not supported Not supported in VIs that run in a web application 2304 attr2304.html

Specifies the path to the TDMS file to which you want to log data. If the file path is changed while the task is running, this takes effect on the next sample interval (if Logging.SampsPerFile has been ...

Specifies a size in samples to be used to pre-allocate space on disk. Pre-allocation can improve file I/O performance, especially in situations where multiple files are being written to disk. For finite ...

Specifies the size, in samples, in which data will be written to disk. The size must be evenly divisible by the volume sector size, in bytes. Not supported Not supported in VIs that run in a web application ...

Indicates the number of digital lines in the channel. Not supported Not supported in VIs that run in a web application 2178 attr2178.html

Specifies whether to tristate the lines in the channel. If you set this property to TRUE, NI-DAQmx tristates the lines in the channel. If you set this property to FALSE, NI-DAQmx does not modify the configuration ...

Specifies whether logging is paused while a task is executing. If Logging.Mode is set to Log and Read mode, this value is taken into consideration on the next call to DAQmx Read, where data is written ...

Specifies the maximum size of a USB transfer request in bytes. Modify this value to affect performance under different combinations of operating system and device. Not supported Not supported in VIs that ...

Specifies the name of the group to create within the TDMS file for data from this task. If you append data to an existing file and the specified group already exists, NI-DAQmx appends a number symbol and ...

Specifies the data transfer mode for the device. Not supported Not supported in VIs that run in a web application DMA 10054 Direct Memory Access. Data transfers take place independently from the application. ...

Specifies under what condition to transfer data from the buffer to the onboard memory of the device. Not supported Not supported in VIs that run in a web application Onboard Memory Empty 10235 Transfer ...

Specifies on which edge of the sample clock to generate samples. Not supported Not supported in VIs that run in a web application Sample Clock Active Edge 14617 Active edges. Sample Clock Inactive Edge ...

Specifies whether to invert the lines in the channel. If you set this property to TRUE, the lines are at high logic when off and at low logic when on. Not supported Not supported in VIs that run in a web ...

Specifies the state of the lines in a digital output task when the task completes execution. Not supported Not supported in VIs that run in a web application High 10192 Logic high. Low 10214 Logic low. ...

Specifies the state of the lines in a digital output task when the task pauses. Not supported Not supported in VIs that run in a web application High 10192 Logic high. Low 10214 Logic low. Tristate 10310 ...

Specifies the state of the lines in a digital output task when the task starts. Not supported Not supported in VIs that run in a web application High 10192 Logic high. Low 10214 Logic low. Tristate 10310 ...

Specifies the logic family to use for generation. A logic family corresponds to voltage thresholds that are compatible with a group of voltage standards. Refer to the device documentation for information ...

Specifies for NI-DAQmx to map hardware registers to the memory space of the application, if possible. Normally, NI-DAQmx maps hardware registers to memory accessible only to the kernel. Mapping the registers ...

Indicates the number of Digital Output sample timing engines supported by the device. Not supported Not supported in VIs that run in a web application 692 attr692.html

Indicates the number of Boolean values expected per channel in a sample for line-based writes. This property is determined by the channel in the task with the most digital lines. If a channel has fewer ...

Specifies whether to apply a digital filter to the digital output of the analog triggering circuitry (the Analog Comparison Event). When enabled, the analog signal must stay above or below the trigger ...

Specifies in seconds the minimum pulse width the filter recognizes. Not supported Not supported in VIs that run in a web application 2EE7 attr2EE7.html

Specifies in hertz the rate of the digital filter timebase. NI-DAQmx uses this value to compute settings for the filter. Not supported Not supported in VIs that run in a web application 2EE9 attr2EE9.html ...

Specifies the terminal of the signal to use as the timebase of the digital filter. Not supported Not supported in VIs that run in a web application 2EE8 attr2EE8.html

Showing 31-60 of 2037 results
2 of 68 pages