What to Do Connect the TB-9214 to the NI-9214 front connector. Tighten the jackscrews to a maximum torque of 0.4 N · m ( 3.6 lb · in. ) . Do not overtighten the jackscrews. Parent topic: Overview

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

This document explains how to connect to the NI-9214 . Note Before you begin, read the NI-9214 Safety, Environmental, and Regulatory Information document on ni.com/manuals and complete the software and ...

TC0+ TC2+ TC2- TC3+ TC3- TC4+ TC4- TC7+ TC7- TC8+ TC8- TC9+ TC9- TC10+ TC10- TC11+ TC11- TC12+ TC12- TC13+ TC13- TC14+ TC14- TC15+ TC15- TC0- TC1+ TC1- TC5+ TC5- TC6+ TC6- COM COM Table 1. Signal Descriptions ...

Ensure that the environment in which you are using the NI 9214 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-78) ...

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection. Attention Suivez ...

Connect only voltages that are within the following limits: Between any two terminals ±30 V maximum Isolation Channel-to-channel None Channel-to-earth ground Continuous 250 V RMS , Measurement Category ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

Changes in the ambient air temperature near the front connector or a thermocouple wire conducting heat directly to terminal junctions can cause thermal gradients. Observe the following guidelines to minimize ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9214 Getting Started 16-CH, ±78 mV, 24 Bit, 68 S/s Aggregate, Isothermal Terminal Block Where to Go Next Tags: Getting Started NI-9214 ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI-9213 Getting Started 16-CH, ±78 mV, 24 Bit, 75 S/s Aggregate Where to Go Next Tags: Getting Started NI-9213 class="topictitle1" id="GUID-65318F5D-7AC8-48D5-BDFA-ABD454685F5F__GUID-57F5B3A6-9173-45EC-8EC3-B16A63F796D2">Where ...

8 current and 8 voltage inputs, 500 S/s ±20 mA current inputs, ±10 V voltage inputs, 24-bit resolution High-Resolution Mode with 50/60 Hz rejection 250 V RMS , CAT II , channel-to-earth isolation (spring ...

Read the NI-9208 Safety, Environmental, and Regulatory Information and complete the software and hardware installation procedures in your chassis documentation.

You can connect an external power supply to the NI-9208 . This power supply provides the current for the devices you connect to the module. Connect the positive lead of the power supply to a Vsup pin and ...

NI 9208 + – AI0 External Power Supply Loop-Powered Current Transducer V sup COM V sup 2 A Max Parent topic: Before You Begin

NI 9208 V sup COM + – COM V sup AI0 External Power Supply Three-Wire Current Transducer 2 A Max OUT + – Parent topic: Before You Begin

16 channels, current inputs, 500 S/s High-resolution mode with 50/60 Hz rejection; Vsup pins for external power routing (2 A/30 V max) ±20 mA , 24-bit resolution 250 V RMS , CAT II , channel-to-earth isolation ...

Make sure that devices you connect to the NI-9209 are compatible with the module specifications. You must use 2-wire ferrules to create a secure connection when connecting more than one wire to a single ...

The NI-9208 is suitable for use in hazardous locations; , and hazardous locations; and nonhazardous locations only. Follow these guidelines if you are installing the NI-9208 in a potentially explosive ...

If your application is subject to high vibration, NI recommends that you use the NI-9940 backshell kit to protect connections to the NI-9208 with spring terminal . Parent topic: NI-9208 Connection Guidelines ...

The NI-9209 is suitable for use in hazardous locations; , and hazardous locations; and nonhazardous locations only. Follow these guidelines if you are installing the NI-9209 in a potentially explosive ...

Connect only voltages that are within the following limits: Isolation Channel-to-channel None Channel-to-earth ground Continuous 60 V DC , Measurement Category I Withstand, up to 2,000 m 1,000 V RMS , ...

If your application is subject to high vibration, NI recommends that you use the NI-9940 backshell kit to protect connections to the NI-9209 with spring terminal . Parent topic: NI-9209 Connection Guidelines ...

What to Use TB-9214 0.05 mm 2 to 0.5 mm 2 ( 30 AWG to 20 AWG ) wire with 5.1 mm ( 0.2 in. ) of the inner insulation stripped and 51 mm ( 2.0 in .) of the

What to Use NI 998xD or NI 998xL Measurement Adapter M4 or Number 8 Screw Screwdriver What to Do Mount the measurement adapter to a flat surface using the mounting hole on the measurement adapter and the ...

Make sure that devices you connect to the NI-9218 are compatible with the module specifications. Parent topic: Overview

Observe the following guidelines when using the NI 9988 solder cup connector adapter or the LEMO crimp connector (784162-01) to create custom cables. Use a shielded cable for all signals. Connect the cable ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

Showing 31-60 of 28317 results
2 of 944 pages