Filtered Results

I would like to run a built LabVIEW Real-Time application/executable on a cRIO. Do I need to purchase any additional NI software to do this?

I want to power my NI hardware with a battery instead of a traditional power supply. Is this possible?

I have connected my CMS device to the Network, when I test the connection from InsightCM web page, I receive the following error: The device at XX.XX.XX.XX failed to connect to NI InsightCM Server at ...

I want to use an FPGA Target on my hardware with the LabVIEWFPGA Module (64-Bit). Is this supported? My FPGA Target device driver installs LabVIEW 64-bit support, but when I try to add the module to a ...

I'm trying to store the data that I acquire on my cRIO on a TDMS file. I have written an application that runs on the cRIO that writes to a TDMS file. I have specified the file path in TDMS Open as a location ...

When I expand Devices and Interfaces in MAX and selectRIO Device, the Serial Number, Model Name, and Model Code are displayed. How do I programatically get this information?

I have an FPGA VI running on my CompactRIO. I am using the FIFO.Start method with the Invoke Method on my Real-Time program, but I get Error -61206: The configured item does not exist. Why is this happening? ...

I am using the CompactRIO-9063. When I open the Web Interface and click on the System Log Viewer, I get the following error: How can I resolve this?

I have a built a LabVIEW real-time executable that I need to deploy to a real-time target, but I do not have access to the LabVIEW Development Environment. Is this possible? I have the LabVIEW real-time ...

When I try to connect to an AXIS camera that is connected to a CompactRIO, I get the following Authentication Error: The camera is configured with password authentication and either the user name and ...

Every hour and a half of running my Real-Time code I get the following error: (Hex 0x661) The LabVIEW Real-Time process encountered an error and restarted automatically.

I am reading from multiple channels on my cRIO and would like to send all of this data to my RT host to be processed, but want to make sure that all of the data is synchronized. How can I do this?

Whenever I reboot my Real-Time controller, the executable runs automatically at startup. What methods can be used to remove the executable, or stop it from running automatically?

I'm about to install the RIO drivers and modules in my computer but I'm not sure if I have to do it in a specific order. Although I have already installed the RIO modules and drivers, I get the following ...

I am using the Azure cloud to store system data collected from my real-time targets. I see that there is a LabVIEW Cloud Toolkit already made to work with Azure, will this work on my real-time device running ...

I have two targets a Real Time controller and an FPGA. Additional to that I have an external device that is sharing data through ethernet. I would like to read the ethernet data directly on the FPGA.

I ordered a cDAQ/cRIO chassis. Does it include a power supply? What if I want to power the chassis with a separate power supply? I am currently ordering a cDAQ/cRIO chassis. What power supply accessory ...

I need to find the serial number or system tag of my NIhardware, software, or system. My serial number provided is not working. How do I check what my serial number should be?

After you've finished installing NI software on your CompactRIO controller, you need to detect your CompactRIO system using LabVIEW.

I want to use myCompactRIO(cRIO) in scan mode and acquire data from several channels at the same time. Using oneI/O variablefor each channel,dragging in from the project explorer, is tedious and not a ...

I have a CompactRIO or sbRIO target in my LabVIEW project as a target but want to change the target to another device of the same model. How can I do this?

R Series multifunction reconfigurable I/O (RIO) devices deliver a twofold change in how analog data is represented in the NI LabVIEW FPGA Module. First, the default data type changes from calibrated raw ...

When deploying a system based on CompactRIO, you may be considering using a power supply that provides only the required power output instead of the maximum output possible for a controller. To do this, ...

I have a Real-Time application that works fine on the LabVIEW development environment. However, when I try to build an executable of my application, I receive the following error message:Error 1059 occurred ...

I would like to deploy images to cRIO controllers that are in a remote location, without having to send out a technician on site with a laptop. Can this be done remotely?

I am interested in maximum power consumption at the boot of compactRIO device. WhenI see the specification sheet of compactRIO, there is Maximum power consumption item. But I thinkthat when the device ...

The Ethernet RIO expansion chassis is intended to be connected to a switch, router, or existing Ethernet network; however, you can connect it to the secondary port of a real-time controller. When using ...

Build on the tutorialAcquire and Analyze Signals With LabVIEW Real-Time, to learn how to locally log data to disk on real-time targets, a necessary task for many stand-alone applications. Review the first ...

Showing 31-60 of 177 results
2 of 6 pages