Filtered Results

Device Operating ModesYou can use one of the following modes for acquiring measurements using an SMU or VPS device in InstrumentStudio: Chart, Waveform, and Sweep. Operating Mode Sourcing Behavior Large ...

You can set the interpolation method of an oscilloscope acquisition to one of the following settings from the Instrument Settings window: No interpolation—The oscilloscope does not interpolate data. Auto—The ...

The following measurement types are available when creating oscilloscope channels with InstrumentStudio. Amplitude Mid Ref Volts Mean Negative Duty Cycle Peak-to-Peak Low Ref Volts Median Positive Pulse ...

SMU/Power Supply Channel Output Status Icon Status Description Generating Output One or more channels in the panel are sourcing voltage or current. Not Generating Output No channels in the panel are sourcing ...

Configure oscilloscope measurements from the Settings tab of the Measurements window, accessible by selecting Add/Remove in the measurement table of an oscilloscope. Gating Screen—Displays only the data ...

You can select one of the following sample modes from the Instrument Settings window when configuring an oscilloscope acquisition with InstrumentStudio: Sample—The oscilloscope measures the signal at a ...

Depending on the device, you can select different sampling methods from the Instrument Settings window of an oscilloscope: Real time—Gathers all the samples for a waveform in one acquisition with one trigger ...

Default setup—Returns the device to the default configuration. Auto setup—Enables all channels and automatically configures device settings. Settings Changed by Auto Setup Setting an oscilloscope to Auto ...

NI-DCPower Devices PXI Express PXI PXIe-4112 PXIe-4113 PXIe-4135 PXIe-4136 PXIe-4137 PXIe-4138 PXIe-4139 PXIe-4140 PXIe-4141 PXIe-4142 PXIe-4143 PXIe-4144 PXIe-4145 PXIe-4147 PXIe-4154 PXIe-4162 PXIe-4163 ...

Waveform Channel Settings Output Impedance—Sets the output impedance value to either 50 Ω or 75 Ω. Load Impedance—Sets the load impedance value to one of the following settings: Match output—Matches the ...

You can determine the current state of an acquisition by looking at the acquisition status icon, located in the Horizontal & Acq. header of an oscilloscope panel. Triggered—The device met the trigger condition ...

Exporting an InstrumentStudio Configuration From the top toolbar or the instrument header menu, select the Export to TestStand button ().You must have TestStand 2019 or later installed for the Export to ...

Disabled—Disables FFT averaging. RMS—Root mean square. RMS averaging averages the energy (or power) of the signal, so it reduces signal fluctuations, but not the noise floor. Peakhold—Performs a peak hold ...

Creating FFT Channels From a large oscilloscope panel, click the FFT button in the Add Channels section. A frequency graph displays. Select a Source for the FFT channel. You can select any single existing ...

A waveform generator channel can be in one of the following states: Stopped—Waveform generation is stopped on this channel. Running—Waveform generation is running on this channel. Waiting for trigger—Waveform ...

Standard Waveform—Outputs waveforms according to the channel settings you specify in InstrumentStudio or an external application. Using a standard waveform allows you to generate several different standard ...

Showing 21-36 of 36 results
2 of 2 pages