Filtered Results

You can control your signal generator programmatically using the supplied PXIe-5423 Interchangeable Virtual Instrument (IVI) driver and an ADE.

Restart the system. Launch MAX, and perform the self-test or self-calibration again. Power off the chassis. Reinstall the failed module in a different slot. Power on the chassis. Perform the self-test ...

There are several required items not included in your PXIe-5423 kit that you need to operate the PXIe-5423. Your application may require additional items not included in your kit to install or operate ...

NI recommends using the SCB-19 connector block to connect digital signals to the AUX 0 connector on the PXIe-5423 front panel. Refer to the following figure and table for information about the SCB-19 signals ...

Front Panel Refer to the following figure and tables for information about the one- and two-channel PXIe-5423 front panel connectors and LEDs. PXIe- 5423 40 MHz 16-Bit AWG ACCESS ACTIVE CH 0 50 PFI 1 PFI ...

Ensure that the environment you are using the PXIe-5423 in meets the following specifications:

Self-calibration adjusts the PXIe-5423 for variations in the module environment using an onboard high-precision calibration ADC. Perform a complete self-calibration after the first time you install the ...

This document explains how to install, configure, test, and use the PXIe-5423. The PXIe-5423 ships with NI-FGEN driver software, which you can use to program the module.

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

If an issue persists after you complete a troubleshooting procedure, contact NI technical support or visit ni.com/support.

Showing 11-20 of 61 results
2 of 7 pages