Filtered Results

The NI 9149 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 12 ATEX 1202658X and is IECEx UL 14.0089X certified. Each device is marked II 3G and is suitable for use in Zone 2 hazardous locations, ...

The following table describes the STATUS LED indicators. Table 3. STATUS LED Indicators LED Pattern Indication Blinks twice and pauses The NI 9149 is in safe mode. Software is not installed, which is the ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

The following figure shows the reset behavior of the NI 9149 . Figure 2. Reset Button Behavior Press and hold RESET button for ≥ 5 s Press and hold RESET button for < 5 s Run Mode Safe Mode Press

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

Put the NI 9149 in safe mode by holding the RESET button down for 5 seconds. The STATUS LED starts blinking three times every few seconds. Set a new DHCP connection by holding the RESET button down for ...

Verify that the following items are included in the NI 9149 kit. Parent topic: Overview Parent topic: GSG Purpose (cRIO/sbRIO)

APPLICATION SUPPORT NI Community ni.com/community NI CompactRIO Developer’s Guide ni.com/compactriodevguide Software Support ni.com/info swsupport Support ni.com/support SOFTWARE CompactRIO Sample Projects ...

This document lists the specifications for the NI 9149 . The following specifications are typical for the -40 °C to 70 °C operating temperature range unless otherwise noted. Caution Do not operate the ...

Showing 11-20 of 94 results
2 of 10 pages