Filtered Results

Writes multiple raw, 8-bit signed integer samples to a task. Use this instance for devices that use 8-bit signed integers as the internal representation of a sample. LabVIEW NXG does not support FPGA devices ...

Creates channel(s) that use a thermistor to measure temperature. Use this instance when the thermistor requires voltage excitation. LabVIEW NXG does not support FPGA devices Not supported in VIs that run ...

Specifies the data transfer mode for the channel. Not supported Not supported in VIs that run in a web application DMA 10054 Direct Memory Access. Data transfers take place independently from the application. ...

Specifies in hertz the rate of the pulse width filter timebase. NI-DAQmx uses this value to compute settings for the filter. Not supported Not supported in VIs that run in a web application 2217 attr2217.html ...

Specifies constraints to apply when the counter generates pulses. Constraining the counter reduces the device resources required for counter operation. Constraining the counter can also allow additional ...

Specifies an amount of time to wait after the Start Trigger is received before acquiring or generating the first sample. This value is in the units you specify with Start.DelayUnits. Not supported Not ...

Specifies the number of samples to acquire or generate for each channel if SampQuant.SampMode is Finite Samples. If SampQuant.SampMode is Continuous Samples, NI-DAQmx uses this value to determine the buffer ...

Two NI-DAQmx Read attributes/properties allow you to check for excitation faults. The first is ExcitFaultChansExist. This attribute/property returns a Boolean of true if one or more channels experience ...

Device ID Device Name 0x0160NI PCI-DIO-96 0x0162NI PCI-MIO-16XE-50 0x0245NI DAQCard-6036E 0x02C4NI DAQCard-6062E 0x0301NI SCXI-1126 0x0302NI SCXI-1121 0x0303NI SCXI-1129 0x0304NI SCXI-1120 0x0306NI SCXI-1100 ...

Filtering is one of the most commonly used signal processing techniques. Signal conditioning systems can filter unwanted signals or noise from the signal you are measuring. Use a noise filter on low-rate, ...

Showing 11-20 of 2088 results
2 of 209 pages