The cRIO-9066 has the following connectors, LEDs, and buttons. Parent topic: Overview Parent topic: GSG Purpose (cRIO/sbRIO)

Complete the following steps to connect the cRIO-9066 to the host computer using the USB device port. Power on the host computer. Connect the cRIO-9066 to the host computer using the USB A-to-B cable. ...

The cRIO-9066 requires a 9 V to 30 V external power supply. The cRIO-9066 filters and regulates the supplied power and provides power for the C Series modules. The cRIO-9066 has one layer of reverse-voltage ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The cRIO-9068 has been evaluated as equipment under DEMKO ATEX and is IECEx certified. Each device is marked and is suitable for use in Zone 2 hazardous locations, in ambient temperatures of -40 °C ≤ Ta ...

The following table describes the STATUS LED indicators. Table 3. STATUS LED Indicators LED Pattern Indication Blinks twice and pauses The cRIO-9068 is in safe mode. Software is not installed, which is ...

The following figure shows the reset behavior of the cRIO-9066 . Figure 2. Reset Button Behavior Press and hold RESET button for ≥ 5 s Press and hold RESET button for < 5 s Run Mode Safe Mode Press and ...

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

Put the cRIO-9066 in safe mode and enable the RS-232 serial port by holding the RESET button down for 5 seconds. The STATUS LED starts blinking three times every few seconds. Use the RS-232 serial port ...

Verify that the following items are included in the cRIO-9066 kit. Parent topic: Overview Parent topic: GSG Purpose (cRIO/sbRIO)

The following table describes the STATUS LED indicators. Table 3. STATUS LED Indicators LED Pattern Indication Blinks twice and pauses The cRIO-9067 is in safe mode. Software is not installed, which is ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

The following figure shows the reset behavior of the cRIO-9067 . Figure 2. Reset Button Behavior Press and hold RESET button for ≥ 5 s Press and hold RESET button for < 5 s Run Mode Safe Mode Press and ...

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

Put the cRIO-9067 in safe mode and enable the RS-232 serial port by holding the RESET button down for 5 seconds. The STATUS LED starts blinking three times every few seconds. Use the RS-232 serial port ...

Verify that the following items are included in the cRIO-9067 kit. Parent topic: Overview Parent topic: GSG Purpose (cRIO/sbRIO)

Showing 261-280 of 282147 results
14 of 14108 pages