Filtered Results

Configures common properties for width triggering. A width trigger occurs when a pulse that crosses a vertical threshold you specify and with a polarity you specify also has a duration that is either within ...

Exports the attribute configuration of the session to a buffer. You can export and import session attribute configurations only between NI-SCOPE devices with identical model numbers, channel counts, and ...

When you install NI-SCOPE on a 64-bit system, you can monitor, control, and record measurements from supported devices using InstrumentStudio. InstrumentStudio is a software-based front panel application ...

For the PCI-5911, this node externally calibrates the internal reference. Use this function only when following the NI 5911 Calibration Procedure. This node uses the external reference source instead of ...

Reset (G Dataflow) NI-SCOPE 17.5, 18.0 NI-SCOPE 18.1 NI-SCOPE 18.5 NI-SCOPE 18.7, 19.0 NI-SCOPE 19.1, 19.5, 19.6 NI-SCOPE 20.0, 20.1 Resets the device. Reset » Reset Resets the digitizer to its default ...

Exports the attribute configuration of the session to the specified file. You can export and import session attribute configurations only between NI-SCOPE devices with identical model numbers, channel ...

For the PXI-5112 and PCI-5112, this node routes the internal reference to the front BNC connector of the specified channel. Use this node when measuring the internal reference of the PXI-5112 or PCI-5112 ...

Returns the onboard temperature, in degrees Celsius, of an SMC-based oscilloscope at the time of the last self-calibration or external calibration. The temperature returned by this node is an onboard temperature ...

Showing 121-130 of 131 results
13 of 14 pages