The PXIe-8267 does not include interface software to configure the RAID. You must use the Disk Management Utility in Windows to manage the software RAID. Note The PXIe-8267 supports only Windows 10 (64-bit). ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

Note To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Carefully inspect the shipping ...

The PXIe-8267 kit contains the following items: PXIe-8267 module PXIe-8267 documentation Note The device kit does not include driver media. Refer to the Software/Driver Installation section for information ...

This document lists the PXIe-8267 electrical, mechanical, and environmental specifications.

This document provides reference information and instructions for installing and configuring your PXIe-8285 module. Unpacking The PXIe-8285 ships in an antistatic package to prevent electrostatic discharge ...

Skip to Content Bookmarks Watch List Search Preferences Log in PXIe-8523 Specifications 4-Port, 100/1000BASE-T1 PXI Automotive Ethernet Interface Module Map Tags: Specifications PXIe-8523 class="topictitle1" ...

Use the LabVIEW RT configuration switches to configure LabVIEW RT if it is installed on the processor module. If you are not using LabVIEW RT, these switches should remain in the OFF position. The processor ...

This section explains software installation and switch configuration for LabVIEW RT on your PXImc processor module. Parent topic: Getting Started

The following section describes the necessary steps to set up your PXImc processor module to run LabVIEW Real-Time. In this section you will configure the processor module boot mode, verify or change IP ...

The compact size of the PXIe-8821 does not allow for an integrated USB CD/DVD-ROM drive. You have the following options: USB CD/DVD-ROM —You can install from a USB CD/DVD-ROM using a bootable installation ...

This section explains software installation and switch configuration for LabVIEW RT on your PXI Express controller. Parent topic: Getting Started

If you are using MAX to configure your PXI system, you must install the PXI Platform Services software on your controller to identify NI PXI and PXI Express chassis and modules in MAX. You can install ...

The most common cause of this problem is a damaged module. Try the module in a different chassis or with a different controller. Also, remove any external cables or terminal blocks connected to the system. ...

The PXIe-8821 has two front panel LEDs that show PC status: DRIVE LED — Indicates when an access to the internal drive is occurring. PWR OK/FAULT LED —Indicates the controller status. The LED indicates ...

This section includes instructions for unpacking and installing your PXIe-8821 controller, including setting up your controller to run LabVIEW Real-Time. It also describes the controller's front panel ...

There are two methods that you can use to reset the CMOS. First Method Enter the BIOS setup program. Press to load BIOS defaults. Answer Y (Yes) to the verification prompt. Select Save and Exit Setup ...

Note Does not include any attached USB devices. Voltage (V) Current (Amps) Typical Current (Amps) Maximum +3.3 V 1.09 A 1.77 A +5 V 0.93 A 2.15 A +12 V 2.86 A 4.82 A -12 V 0 A 0 A

Note Specifications are subject to change without notice. Caution Using the PXIe-8821 RT controller in a manner not described in this user manual can impair the protection the controller provides. Features ...

Showing 221-240 of 271472 results
12 of 13574 pages