Indicates if the device is a simulated device. Not supported in VIs that run in a web application 22CA attr22CA.html

Lists all physical channels on devices installed in the system.

Indicates in degrees Celsius the current temperature of the device. Not supported in VIs that run in a web application 223B attr223B.html

Indicates an array containing the names of the digital input lines available on the device. Not supported in VIs that run in a web application 2320 attr2320.html

Indicates the maximum digital input rate of the device. Not supported in VIs that run in a web application 2999 attr2999.html

Indicates the number of Digital Input sample timing engines supported by the device. Not supported in VIs that run in a web application 692 attr692.html

Specifies the name of a terminal where there is a digital signal to use as the source of the Advance Trigger. Not supported in VIs that run in a web application 1362 attr1362.html

Specifies the type of trigger to use to advance to the next entry in a switch scan list. Not supported in VIs that run in a web application Digital Edge 10150 Advance to the next entry in a scan list on ...

Indicates in coulombs pairs of input charge ranges for the device. Each pair consists of the low value followed by the high value. Not supported in VIs that run in a web application 3111 attr3111.html

Specifies a physical channel or list of physical channels to modify. You cannot modify the expiration state of dedicated digital input physical channels. Not supported in VIs that run in a web application ...

Specifies the output signal delay in periods of the sample clock. Not supported in VIs that run in a web application 1757 attr1757.html

Indicates an array containing the names of the digital output ports available on the device. Not supported in VIs that run in a web application 2323 attr2323.html

Specifies the polarity of the exported Advance Complete Event. Not supported in VIs that run in a web application Active High 10095 High state is the active state. Active Low 10096 Low state is the active ...

Specifies the width of the exported Advance Complete Event pulse. Not supported in VIs that run in a web application 1654 attr1654.html

Specifies the trigger to which to route the Advance Trigger. Not supported in VIs that run in a web application 1645 attr1645.html

Indicates the type of rosette gage. Not supported in VIs that run in a web application Rectangular Rosette 15968 A rectangular rosette consists of three strain gages, each separated by a 45 degree angle. ...

Indicates the raw strain channels that comprise the strain rosette. Not supported in VIs that run in a web application 2FFB attr2FFB.html

Specifies the 'A' constant of the Callendar-Van Dusen equation. NI-DAQmx requires this value when you use a custom RTD. Not supported in VIs that run in a web application 1010 attr1010.html

Specifies the 'B' constant of the Callendar-Van Dusen equation. NI-DAQmx requires this value when you use a custom RTD. Not supported in VIs that run in a web application 1011 attr1011.html

Specifies the 'C' constant of the Callendar-Van Dusen equation. NI-DAQmx requires this value when you use a custom RTD. Not supported in VIs that run in a web application 1013 attr1013.html