Filtered Results

I am getting an error in NI MAX saying the my IP settings are inconsistent, when I go to select the Network Setting Tab I cannot modify/change the settings. When I reset the cRIO to safe mode I am not ...

I am using C Series analog input modules with Delta-Sigma (DSA) and successive approximation register (SAR) ADC types with my cRIO. How can I synchronize these two types of modules together in FPGA?

I am trying to use the System Configuration API (or the Replication and Deployment (RAD) Utility) to clone my RIO system. After successfully using Create System Image. vi, I'm seeing the following error ...

How do I interface with the PFI0 on cRIO controllers with DAQmx (cRIO-904x and cRIO-905x) How do I synchronize FPGA acquisition with DAQmx acquisition? How can I send the PFI0 signal on mycRIO-904x or ...

How do I use the input and output terminals of my CompactRIO's modules? I have a CompactRIO and I want to use it to generate or acquire data from its C series modules? How do I get started with my cRIO ...

I am using the Sync model of CompactDAQ (cDAQ), CompactRIO (cRIO), or Industrial Controller and am utilizing Time Sensitive Networking (TSN). I need to purchase Ethernet switches that are TSN-compatible ...

I am using CompactRIO Scan Mode and need to programmatically set the shunt calibration of a channel. How can I do this?

I want to monitor CPU usage on the real-time embedded target VI.When I develop the real-time target VI from the host computer, it works normally. But, after deploying it as the start-up executable, it ...

Error -50200 occurred at DAQmx Create Timing Source VI when implemented on a NI Linux RT cDAQ-9137. Error -50200 occurred at DAQmx Create Timing Source (Control Loop From Task).vi:6770001 Possible reason(s): ...

How do I use the File Transfer Protocol (FTP) to transfer data to and from an external CompactFlash card or external USB drive connected to a Real-Time target?

Showing 91-100 of 292 results
10 of 30 pages