FieldDAQ devices include the FD-11601, FD-11603, FD-11605, FD-11613, FD-11614, FD-11634, and FD-11637. Analog Input The following table lists the number and naming of analog input physical channels for ...
FieldDAQ devices use software calibration to adjust the software scaling of signals read from and produced by your device. Using a precise reference signal, your device measures and calculates scaling ...
The delta-sigma ADCs and DACs on DSA devices, C Series Delta-Sigma devices, and NI 433x devices employ digital filtering that imparts a delay of several sample intervals. The filter delays are equal in ...
The First Sample Timestamp attribute/property can only be enabled for hardware timed tasks, and is enabled by default for Analog Input and Digital Input tasks. For Digital Input tasks as well as C Series ...
If you attach an IEPE accelerometer or microphone to an AI channel that requires excitation from a device such as a DSA device, NI 9230, NI 9231, NI 9232, NI 9234 or an NI 9250Devices are listed as examples ...
When performing a buffered time measurement of a digital signal, the initial sample is often invalid. The following devices detect such samples and discard them. Bus-powered M Series USB devices Parallel ...
When you use MAX or the NI-DAQmx API to reset a device, NI-DAQmx sets terminals and output channels to an initialized state. Digital I/O Lines NI-DAQmx sets all digital I/O lines to the configured power-up ...
You can configure each AI channel of your DSA device to be either AC or DC coupled, with the exception of the NI 4495, the NI 4496, and the NI 4498 devices, which are AC coupled only. If you select DC ...
Internal channels for the FD-11613 The following internal channels are available. Internal Channel Name Description FD11613-xxxxxxx-Bank1/_cjtemp0 This channel is used for cold-junction compensation. FD11613-xxxxxxx-Bank1/_cjtemp1 ...